View Single Post
Old 08-16-2016, 01:25 AM   #31 (permalink)
tauscnc
Registered Users
 
Posts: 491
 

Join Date: Apr 2004
Default

Another excellent write up myxiplx!!

I do have a questions. On page 21 you mention to CLR out the Gyro sens control button but not to add anything back in. Is this correct. I tried this and was unable to get my flight mode to mix with the Gyro sens..

I added SA as the control and now it switches in the Gyro Settings menu. Then I added SG under the Tuning part (throttle hold) and had to change the % in each flight mode to make sure TH worked.

I could not make page 22 work without the SA switch attached to the Gyro sens and SG set to the Tuning part.

thanks
tauseef
__________________
www.cuttingedgecnc.com
tauscnc is offline        Reply With Quote