View Single Post
Old 07-12-2017, 11:16 PM   #59 (permalink)
Tek18x
Registered Users
 
Posts: 1,368
 

Join Date: Nov 2012
Default

Since this is the first thing to pop up on most google searches, here is what I found:
This will allow you to use 4 banks and separate throttle curves independent of each other.
Aka, set 1 governed head speed... have 3 % F-mode's of that head speed (aka, 2000 head speed, 90% flat=1800... 95% flat=1900... you get the point)
and also 4 separate banks.
My head hurts, and I'm not sure about the math behind it a lot of IF statements and using excel but i got it working.... not perfect but it works.

Gyro:
Ch: Gear
SW:Mix
POS0: -80%
Pos1:100%

Mix1: Aux2>gyr
Rate: 50%/ 60%
Offset:75%
Trim:INH
N12H

should I've you -67,-35,25% and whenever you flip gear up in any mode, it will go to bank 3...

Anyone see any issues with this


EDIT: i also figured out how to do it with other switches, aka i did the rudder switch if anyone would like to know...

DR/exp>rudder>inhibit
Gyro>
Pos0:-80%
Pos1:100%
Ch: gear
Sw:mix

Governor:
Pos0: -100%
Pos1: -38%
Pos2: 50%
CH: aux2
SW: Rud D/R

Mix1:
Gov>GYR
Rate: 75%/75% (this 2nd value doesn't ever factor in because Master-Offset is always > 0)
offset:-100%
Trim:INH
N12H

I have 1 year left of mechanical engineering, and this was extremely hard to learn, would have been a homework assignment honestly. So id imagine some people can benefit from it.

Enjoy
Tek18x is offline        Reply With Quote