View Single Post
Old 11-29-2017, 07:42 AM   #17 (permalink)
jharkin
Registered Users
 
Posts: 5,415
Thread Starter Thread Starter
 

Join Date: Nov 2009
Location: Massachusetts
Default More dissasembly...

Last night I finished boxing up the engine for Hanson and continued with disassembly. I got the generator off, pulled out the clutch stack, main gear, and head etc.

The upper pinion block needs to come off to assemble on the new clutch stack, and the lower main bearing block and front tail transmission block can both be removed and discarded at this point also.

Next up will be taking all the cyclic servos off and pulling out the other main bearing blocks, then any ancillary components that are in the way of the cutting template, before taking the frame sides off one at a time to modify.

Shop time so far: 3 hours
Attached Thumbnails
Click image for larger version

Name:	2017-11-28 20.35.58.jpg
Views:	97
Size:	96.1 KB
ID:	730085  
__________________
MA Whiplash Gas v2 | HelixHeli T700 Gas conversion | T450 Sport FBL | OMP M1
Futaba, Bavarian Demon, Hanson Engines| DIY Lithium field battery

Last edited by jharkin; 11-29-2017 at 12:01 PM..
jharkin is online now        Reply With Quote