View Single Post
Old 12-13-2017, 07:13 AM   #38 (permalink)
Registered Users
Posts: 5,400
Thread Starter Thread Starter

Join Date: Nov 2009
Location: Massachusetts

I also did a little more work on the wiring (not shown) and installed the last few frame spacers and mounts.

One thing that's different on the conversion: without the tail transmission there is only one screw to attach the rear canopy mount tabs.

If you set them up as breakaway this is fine. If you where using both screws to reduce vibes then you can't do that any more. I found a solution using a spare frame spacer I had lying around. Alternately you could use a longer screw like an M3x12 with a nylock.

Shop time so far: 11.5 hr
Attached Thumbnails
Click image for larger version

Name:	2017-12-12 20.19.27.jpg
Views:	80
Size:	232.2 KB
ID:	731361  
MA Whiplash Gas v2 | HelixHeli T700 Gas conversion | T450 Sport FBL | OMP M1
Futaba, Bavarian Demon, Hanson Engines| DIY Lithium field battery

Last edited by jharkin; 12-18-2017 at 02:58 PM..
jharkin is offline        Reply With Quote