View Single Post
Old 07-24-2018, 04:59 AM   #7 (permalink)
gdesdigu
Registered Users
Thread Starter Thread Starter
 

Join Date: Jan 2012
Default

Next up is to bolt the engine to itís mount. Watch out for the orientation. Pretty straight forward thing to do. Next thing to do was to build the lower frames around the engine and like the upper frames, leave the screws pretty loose, Iíve tightened everything down only after joining the two frames together with the main shaft in place and with the whole thing held down on a glass table. That way I can be sure that everything stays nice and true during the whole process and everything lined up well.

The fuel tank was no hassle, Iíve just replaced the very soft fuel tube by a regular piece of tubing out of habit. Some may say itís not the right way to do it but Iíve had bad thing happen to me before with that kind of tubing before. The tank itself is held down by 4 rubber grommets and even though it can move by a big amount Iíve never had any problems with that.

Click image for larger version

Name:	IMG_0318.jpg
Views:	50
Size:	116.1 KB
ID:	751559

Click image for larger version

Name:	IMG_0319.jpg
Views:	49
Size:	129.3 KB
ID:	751560

Click image for larger version

Name:	IMG_0340.jpg
Views:	55
Size:	108.8 KB
ID:	751561

Click image for larger version

Name:	IMG_0341.jpg
Views:	61
Size:	117.0 KB
ID:	751562

Click image for larger version

Name:	IMG_0342.jpg
Views:	55
Size:	76.6 KB
ID:	751563

Click image for larger version

Name:	IMG_0343.jpg
Views:	53
Size:	70.5 KB
ID:	751564
gdesdigu is offline        Reply With Quote