View Single Post
Old 11-23-2019, 02:29 PM   #2 (permalink)
Registered Users

Join Date: Apr 2013

I am not sure what this could be. I am assuming you have the DXe Tx. Normally the heli drifts when it is in stability (normal) mode and a trim flight is necessary. There should be no tendency to drift when switching through the modes. Put the heli on the ground and switch on throttle hold. Now switch through the modes and see what happens to the swash. In normal mode it is tilted to one side, I don't know why but this is normal behavior, but it should be level in modes 1 & 2. If it tilts in these modes to make the heli drift to the left then there is an issue. You can also test the trim on the DXe. Every time you press the trim the Tx will beep but when the trim is centre the beep is a different tone check this and set all trims to centre.
Allan114 is offline        Reply With Quote