Thread: 500 Blackhawk
View Single Post
Old 05-03-2020, 10:18 AM   #1 (permalink)
Registered Users
Posts: 126

Join Date: Mar 2009
Default 500 Blackhawk

To all the scale gurus out there
Just looking for some advice please for a Trex ESP in a Blackhawk fuse with a 4 blade head.
I was originally going to use a Hyperion 1000Kv & YEP80 with a 162main/14T pinion so looking at 1800 headspeed but I subsequently got a good deal on a Kontronik Jive 100 but later realized that the optimum setting for Kontronik Jives is only 60-65%(in mode 4)thus to obtain a 1800RPM = a 24T pinion!
Would I be better off with
(a)Hyperion 1000Kv / YEP80 (100% Throttle ) 14T = 1800RPM or
(b) MX1600Kv (stock)/Kontronik(60% Throttle) 14T =1800RPM ?
Any advice is greatly appreciated.
Goblin 570(12s),Trex 500Pro,Trex 450Pro.
MD500E(600), Airwolf(500),Agusta A109(Blade450X)
Thtasher is offline        Reply With Quote