View Single Post
Old 12-05-2020, 09:50 AM   #6 (permalink)
JimJW
Registered Users
 
Posts: 3,846
 

Join Date: May 2018
Location: Frozen Wasteland
Default

Quote:
Originally Posted by curmudgeon View Post
These are the specs of your Align 520MX motor:
  • Input voltage: DC 18-26V 6s LiPo
  • Max continuous current: 85A/130A(5sec)
  • Max output power: 1900W/2750W(5sec)
  • KV value: 1600KV
  • Stator Arms: 9
  • Magnet Poles: 6
  • Dimension: spindle 5x45x71.7mm
  • Weight: 267g (aprox.)
The stator size seems to be 3527, which means 35mm wide, and 27mm tall.

I am not able to find a suitable Xnova replacement motor of similar size and kv.

The closest I found was the Lighting 3225 -1100

The Diameter appears to be 50mm vs 45mm of the Align. The OP needs to figure out if it will fit. At least get out a ruler.

The other thing is the gear ratio will need to be changed the Xnova has a Kv of 1100 while the Align is 1600 Kv. Or run a higher cell count pack & esc. Or get a new pinion as suggested earlier. Or run a much lower headspeed. Or have XNova rewind it for a higher Kv...

Quote:
Originally Posted by XNova 3225 Data Sheet
Slots & Poles 12n10p
Winding T YY
rpm/V 1100
Volt (V) 10 / 22.2
Io(A) 3.1 / 5.1
Rm (mohm) 10 / 10
Weight (without connector) (g) 240
Body Length (no shaft) mm 50
Diameter (mm) 40.5
Shaft Length (mm) (Details pictures) A
Shaft Dia. (mm) 5
Mounting Holes CTC Distance (mm) 25
Mounting Screw M3x0.5
Max Eff. Curr. 55.68 / 106.40
Max Eff. 88.86 / 90.41
Kt (Nm/A 0.0087
Km (Nm/sqrt(w)) 0.0868
Max Continuous Power(Watts) 2400
Peak Continuous Power(Watts) (2 sec) 3100
Max Continuous Current(Amps) 110
__________________
Jeti DS12 / Ikon2 / Oxy2/4/5 / SAB Mini Comet / Fireball / G380 / Gaui X5v2 / Kraken 580
JimJW is online now        Reply With Quote