View Single Post
Old 12-19-2020, 10:38 PM   #2 (permalink)
JimJW
Registered Users
 
Posts: 3,000
 

Join Date: May 2018
Location: Frozen Wasteland
Default

The SPM4651T and the SPM4649T will both work with an Ikon2.

Keep in mind the SPM4649T is an SRXL based interface to the Ikon2 while the SPM4651T uses SRXL2

You will need to go into the Ikon settings and update the settings for the receiver. Then rebind and check the channel on the TX setup page. Make sure the channels are still mapped correctly and the travels still go to 100%

The cables look similar between the two RXs but the pin out at the receiver is changed. You’ll need to use a different cable for the new RX as well
__________________
Jeti DS12 / Ikon2 / Oxy2/4/5 / SAB Mini Comet / Fireball / G380 / Gaui X5v2 / Kraken 580
JimJW is online now        Reply With Quote