View Single Post
Old 01-08-2021, 05:56 AM   #2 (permalink)
Andy from Sandy
Registered Users
 

Join Date: Dec 2006
Default

On pretty much all fbl controllers it takes a single wire from the sbus receiver to the fbl controller to carry all of the channels.

What I did using vbar (not NEO) is using an ESC with two outputs is run the main to the vbar ESC in and the secondary power to the receiver.

If the ESC you have only has a single output that will go to the ESC input/output on the fbl controller you are using. The receiver will get its power from the sbus socket on the fbl controller.
__________________
Don't quote me to answer please, just add a comment.
Andy from Sandy is offline        Reply With Quote