HeliFreak - View Single Post - FlySky FS-i6X three position switch [SOLVED]

PaoloFCantoni · 01-12-2021, 01:35 AM

On DIscord, Ade helped me to get my FS-i6X working with AccuRC.

It works quite well, but there is an anomaly I thought I'd discuss via HF rather than Discord.

The switches on the FS-i6X seem to work differently from the ones I'm normally used to on the other TXs I use.

For the two-position switches, two channels are used. Say Button1 and Button2. As you flick the switch, Button1 goes from 100 to 0 and Button2 goes from 0 to 100. This is not a problem for AccuRC since you just select one of the two buttons and run your function off that.

In the case of the three-position switch, it's more complicated. Position1 = Button1 100, Button2 0. Position2 (Middle) = Button1 100, Button2 100. Position3 = Button1 0, Button2 100. In other words, to determine the position of the switch you need to interrogate two items.

There doesn't seem to be any way for AccuRC to handle that, is that correct?

TIA,
Paolo

01-12-2021, 01:35 AM	#1 (permalink)
PaoloFCantoni Registered Users Join Date: Feb 2013 Location: Perth, Western Australia (the most isolated (AND COVID FREE!) capital city on earth!)	FlySky FS-i6X three position switch [SOLVED] On DIscord, Ade helped me to get my FS-i6X working with AccuRC. It works quite well, but there is an anomaly I thought I'd discuss via HF rather than Discord. The switches on the FS-i6X seem to work differently from the ones I'm normally used to on the other TXs I use. For the two-position switches, two channels are used. Say Button1 and Button2. As you flick the switch, Button1 goes from 100 to 0 and Button2 goes from 0 to 100. This is not a problem for AccuRC since you just select one of the two buttons and run your function off that. In the case of the three-position switch, it's more complicated. Position1 = Button1 100, Button2 0. Position2 (Middle) = Button1 100, Button2 100. Position3 = Button1 0, Button2 100. In other words, to determine the position of the switch you need to interrogate two items. There doesn't seem to be any way for AccuRC to handle that, is that correct? TIA, Paolo __________________ XLPower 700, ALIGN 550L (beater), Prôtos MAX V2 Leggero 700 & Evoluzione 800 (RCHN #803 - joined just before they shut up shop!) Last edited by PaoloFCantoni; 01-17-2021 at 06:36 PM..