View Single Post
Old 01-14-2021, 08:01 PM   #1 (permalink)
Registered Users

Join Date: Aug 2019
Location: Dallas
Default Help. Hobbywing 130a V4 opto Neo Gov.

Setting up or attempting to set up HW 130 V4 current vbar firmware.

I have the HW gov mode set to Heli Linear, active freewheel disabled. The rest are just the stock settings. 12T pinion 112T main gives me a ratio of 9.330 in the Gov settings in VBC touch.

I initially set low head speeds to test 1200 1400 1600.

I test spooled up without blades and my VBC touch says 29300 RPM's But it feels more like 1200ish in bank 1.

Could this outlandish RPM reading be due to having no blades on and the sensor is over shooting?

If anyone could share some current setup numbers within the neo for run up/soft start that would be great.

Attached are my HW internal settings.
Attached Thumbnails
Click image for larger version

Name:	image1.png
Views:	46
Size:	205.9 KB
ID:	900087   Click image for larger version

Name:	image2 (1).jpeg
Views:	34
Size:	153.8 KB
ID:	900089   Click image for larger version

Name:	image0.png
Views:	26
Size:	183.3 KB
ID:	900091  
joeflash211 is offline        Reply With Quote