View Single Post
Old 02-19-2021, 08:06 PM   #12 (permalink)
ticedoff8
Registered Users
 
Posts: 6,071
 

Join Date: Jan 2010
Default

I'm not sure if this helps answer the question
The physical positions for switch B is shown on the label in this picture (a dusty DX9) and this lines up with the software.
If the physical positions do not match what you want them to be in the radio, there is a software setting to reverse it.

In the defaults of the DX9,
Pos0 = "Norm"
Pos1 = "FM1"
Pos2 = "FM2"
It is the same in my old DX7 (OG) and my newer iX12

If you want to "reverse it", then check in the "Digital Switch Setup" menu.
Function List (press the scroll wheel once) and scroll down to "Digital Switch Setup" and select it.
Scroll down 1 box to "Switch: Select" and press once - the box will start blinking.
Scroll down to "Flight Mode" and press once.
Then scroll down and change what you like.
By default,
"NORMAL:" = -50%
"FLIGHT:" = 0% (aka: FM1)
"FLIGHT" = 50% (aka: FM2)
I think if you flipped NORMAL and FLIGHT values, that would un-reverse them (or reverse them if you like)

Or... (but do not do both).

Continue to scroll down to "Switch B" and press once.
Then scroll down and change what you like
My bet is this is the one that was reversed.
By default,
Pos 0: = 100%
Pos 1: = 0%
Pos 2: = -100%
If you flipped Pos 0: and Pos 2: values, that would un-reverse them (or reverse them if you like)
Attached Thumbnails
Click image for larger version

Name:	IMG_0664.jpg
Views:	84
Size:	2.70 MB
ID:	905745  
__________________
"Those who can make you believe absurdities can make you commit atrocities." (Voltaire)
Watch out: There are a lot of absurdities being thrown around lately.
+ > RIP: John Lewis

Last edited by ticedoff8; 02-19-2021 at 08:43 PM..
ticedoff8 is offline        Reply With Quote