View Single Post
Old 05-17-2021, 09:04 AM   #35 (permalink)
Xrayted
Registered Users
 
Posts: 11,398
 

Join Date: Sep 2008
Location: Smyrna, GA
Default

Go to the Diagnostic tab in the Spirit setup and verify the throttle bar is moving. That will rule out any potential wiring setup issues.

Make sure its giving you zero throttle so the ESC will arm, and you already have the proper HW endpoint values 1100/1940 set in, so you should be good to go if so.

The only thing that would keep the motor from arming and running when powering up through the Spirit would be if the ESC isnt seeing zero, and in this case it will just beep. If so, try and lower the 1100 value in the Spirit gov tab slowly one click at a time and see if it will arm at any point along the way down.
__________________
Tony
Synergy 516, Gaui R-5 Speed, Cypher Vtol Jet, Spirit FBL, Hobbywing and Scorpion Tribunus ESC, Xnova motors. The girl in my DX9 tells them all what to do
Xrayted is offline        Reply With Quote