View Single Post
Old 06-04-2021, 05:14 AM   #8 (permalink)
spider88
Registered Users
 
Posts: 91
 

Join Date: Sep 2015
Default

if do you want also activate throttle hold you set point 1 of the curve motor at 3%.
After you entry in mený functions
in sections throttle hold you set autodetect
click button throttle hold on radio.
Make it so that the cursors in the yellow circle 2 are neighbors to space which occupies the yellow circle 1 (the cursor green you must find to the left)
so when you push throttle hold the rectangle 3 must become green, when you push again the button throttle hold the green needs shut off.
This is one method.
You can also use the flat curve for the motor on the radio.
I have the model always with curve motor flat for 3d and i turn on my model with throttle hold activated why i have 6 channel and one channel i use for rescue mode.
I would like to understand in accurc there is curve motor as in the picture, this 5 points they come commanded from the curve motor of my radio or from the point where it is located the stick of the radio?
Attached Thumbnails
Click image for larger version

Name:	hold.jpg
Views:	6
Size:	159.1 KB
ID:	920207   Click image for larger version

Name:	point.jpg
Views:	8
Size:	41.4 KB
ID:	920209  
spider88 is offline        Reply With Quote