Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > Blogs > NikolasZ


Rate this Entry

Re-build the Belt-CP part 1

Posted 03-18-2009 at 07:51 AM by NikolasZ
Updated 05-02-2009 at 12:58 PM by NikolasZ

Now that I have all the parts, I started the re-build of the Belt-CP.

The G10 frame is fantastic! Thick, sturdy and nothing like the Esky CF-frame. Fact is that it is so thick, that some of the screws were too short! :P

I had some troubles installing the servos on this frame though! The two back-servos (Aileron and Pitch) were just fine, but the front Elevator servo... :arggg:. Is it supposed to stick out from the side as much as it does?:thinking

Yesterday I used about 4-5 hours just to set up the head. I just say one thing: Get the appropriate tools! Without the swash-leveler och the pitch-gauge, I would be completely lost, and the adjustement of the head would have been SOOO wrong. At last I got the head centered, and a good pitch of +10/-10 degrees! Just perfect!:thumbup:

Today I am going to setup the tail, then I will be good to go for a first spin and test hover! Really excited!:fly

Pictures to come soon!
Views 1219 Comments 0
« Prev     Main     Next »
Total Comments 0

Comments

 




Copyright © Website Acquisitions Inc. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.

SEO by vBSEO 3.6.1