Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > Blogs


"The Grass Is Brown Everywhere"

Year's ago I took a job in Texas and when I started work I discovered that I had been "sold" on the job as much as I had been selling myself to the company.

After 2 weeks of discovering how this new job was even worse than my previous one, I returned to the former job (with a big pay increase) and coined the phrase "The Grass Is Brown Everywhere" to explain why I returned.

The acronym TGIBE became my username on many forums and accounts over the years...
Old

500 Build Part VII - Finally done!

Posted 05-19-2008 at 04:48 PM by TGibe (The Grass Is Brown Everywhere)

Finally was able to complete my build and take the bird out for a maiden flight.



Here were the final steps:
  • Set the head up with norm pitch curve between -3 degrees and +11 degrees [37, 43.5, 50, 75, 100] and a throttle curve of [0, 65, 80, 90, 100]
  • Charged three of five 6s2600 batteries.
  • Checked main blades for balance (they were balanced out of the box).
The maiden flights went well as I was able to take both my 450 and 500 to the local field over the weekend....
TGibe's Avatar
Registered Users
Views 1091 Comments 0 TGibe is offline
Old

500 Build Part VI

Posted 05-05-2008 at 04:18 PM by TGibe (The Grass Is Brown Everywhere)

I am entering the final stretch with my 500 build and am getting anxious to see this thing fly. The one thing I wan't really expecting was how heavy this thing is! With the battery, motor, and electronics installed you can tell this is a substantial bird.


Anyway, I was able to spent a couple of hours on the build Sunday evening and accomplished the following (the rest of the weekend was spent golfing and on honey-do's):
  • Mounted the motor and attached the RevCo 12T pinion.
  • Cleaned
...
TGibe's Avatar
Registered Users
Views 1144 Comments 0 TGibe is offline
Old

500 Build Part V

Posted 04-28-2008 at 11:40 AM by TGibe (The Grass Is Brown Everywhere)

This weekend I was able to make some progress once again on my build. I really got sidetracked with all of the sleeving on the servo wiring. I even ended up putting braiding on the satellite RX!


On Saturday and Sunday I was able to accomplish the following:
  • Added braiding to all cabling except the main power cables.
  • Cut down the gyro cabling to 4-5 inches, added braiding, and repinned connectors.
  • Mounted the RX and Gyro to my rdlohr tray using Zeal tape.
  • Mounted
...
TGibe's Avatar
Registered Users
Views 1147 Comments 0 TGibe is offline
Old

500 Build Part IV

Posted 04-23-2008 at 10:00 PM by TGibe (The Grass Is Brown Everywhere)

Today I was able to work on my 500 for a couple of hours. Golf season has really hit full speed and with 2-3 rounds of golf eating up 10-15 hours a week I am finding it harder and harder to complete the build. I will admit that I am a little torn as I play golf I tend to think of the heli...

Anyway, today I was able to accomplish the following:
  • Determined the final location for all of the electronics (RX, Gyro, ESC, Lipo alarm, buzzer, Eagletree V3, Eagletree LCD display panel,
...
TGibe's Avatar
Registered Users
Views 1039 Comments 0 TGibe is offline
Old

Free Shipping?

Posted 04-19-2008 at 02:08 PM by TGibe (The Grass Is Brown Everywhere)

I just thought I would put this out there as lately free shipping is costing me more than the parts I need.

Here is how it works for me:

-I need a part (usually I just want a part, but that is a different issue altogether).
-The part is usually under $40.00, but I know that if I order $100 worth of stuff the shipping is free (instead of $4.60)
-Wanting to get free shipping I spend 20-30 minutes on the vendors site looking for items to add to my order to get...
TGibe's Avatar
Registered Users
Posted in Uncategorized
Views 923 Comments 0 TGibe is offline




Copyright © Website Acquisitions Inc. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.

SEO by vBSEO 3.6.1