Tail servo distance - CB180Z - HeliFreak
Fun, Learning, Friendship and Mutual Respect START  HERE

Go Back   HeliFreak > R/C Helicopter Support > Walkera Helicopters > Others

Others Walkera Other Models Helicopter Support

Thread Tools Display Modes
Old 04-03-2012, 05:56 PM   #1
Registered Users

Join Date: Jan 2012
Location: Northeastern Ohio
Default Tail servo distance - CB180Z

Can someone give me the distance that the mounting bracket that wraps around the tail boom should be from the tail boom mount in the heli? I busted my tail servo again.......... it appears the mount that servo mounts has moved forward. I know when I install the new servo that the horn has to be perpendicular to the tail boom but there must a distance for the cradle that holds the servo.

Thank you!!
rzrfun111 is offline        Reply With Quote
Old 04-28-2012, 06:56 AM   #2
Ford Doctor
Registered Users

Join Date: Apr 2012
Location: New Jersey

I don't think there is a specification for this. I ran into the same question after my first repair requiring removal of the tail. I ended up simply sliding the servo back and forth using test flights until my Helli stopped rotating to get it in the ballpark then I made my final adjustments. I am about to overhaul my helicopter - if I remember I will post where my servo is positioned.
Ford Doctor is offline        Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Copyright © 2004-2016 by RCGroups.com, LLC except where otherwise indicated. The HeliFreak.com logo is a trademark of RCGroups.com, LLC.