Register Now

kljw · 07-04-2012, 05:29 AM

Hello All
i am trying to find if there is a scale fusalarge of a HU-1B for the trex 600 efl? if anyone knows where i can get one, i would appreciate the info.

many thanks

keith

pril250 · 07-04-2012, 06:14 AM

You may get a better response if you posted this question in the Scale section.

kljw · 07-04-2012, 06:56 AM

good point!

LAMAR COOLEY · 07-04-2012, 10:22 PM

kljw
Check out "RCAerodyne". They offer this heli specifically for a 600 size electric.
I've built a couple of them. I've added quite a bit of scale fittings to my number 2 bird.
You will find that this "kit" comes with a set of metal side frames in order to reduce the height of the mechanics so that it will fit the fus. It also comes with an extra "long" tail drive belt. I would also recommend that you get their "short" tail rotor case. It makes for a much nicer tail appearance. Be aware that you will have to cut the tail boom to fit this fuselage. So putting an extra Trex 600E tail boom on your order list is recommended.
Also, if you use the stock 600mm main blades and stock tail rotor blades. You will have a problem. Because of the shortened tail. The 600 mm main blades will contact the stock tail blades. So you will have to go with shorter main or tail blades. I went shorter tail blades. Over all I'm quite pleased with the kit although there were a few "bugs".
By the way the instruction"manual?" is very very skimpy
I hope this is of some small help.
If you need any other pointers or tips about this one let me know
Regards

LAMAR COOLEY · 07-04-2012, 10:33 PM

kljw
Sorry, I did not mention that this fuselage will only accept a belt tail drive system.
So you will have to convert to belt drive. Therefor you will also need the main tail drive
assembly.
Regards

kljw · 07-05-2012, 11:40 AM

Lamar
many thanks for the info, i will have alook at the web page. i worked out that i would need a belt drive tail, but i am unsure if all the other parts will tranfer across from the 600 Pro EFL i have.
need to do some more searching on this.

keith

Chris Reibert · 07-07-2012, 10:32 PM

RCA's website is www.scaleflying.com
If you have any questions give them a shout and Rob can get you squared away with everything you need to get your scale project going

07-04-2012, 05:29 AM	#1 (permalink)
kljw Registered Users Join Date: Mar 2008	Scale Body Hello All i am trying to find if there is a scale fusalarge of a HU-1B for the trex 600 efl? if anyone knows where i can get one, i would appreciate the info. many thanks keith

07-04-2012, 06:14 AM	#2 (permalink)
pril250 Registered Users Join Date: Aug 2008	You may get a better response if you posted this question in the Scale section. __________________ T-Rex600-ICE100,WR10ABEC,Scorp4025-1100+17T,Kasama head,QUK Swash CNC Tail,G-Force blocks,3152,DS760+BLS251,DX7+AR7000,FM. Blade400-CC ICE50,Scorp2221-8+12T,Sonix Head&Tail,5A BEC,HS65HB,Quark+3500G,AR7000,Align Carbon blades,TRex500 Skids,Flymentor.

07-04-2012, 10:22 PM	#4 (permalink)
LAMAR COOLEY Registered Users My HF Map location Join Date: Oct 2006	Scale Body (600 UH-1b) kljw Check out "RCAerodyne". They offer this heli specifically for a 600 size electric. I've built a couple of them. I've added quite a bit of scale fittings to my number 2 bird. You will find that this "kit" comes with a set of metal side frames in order to reduce the height of the mechanics so that it will fit the fus. It also comes with an extra "long" tail drive belt. I would also recommend that you get their "short" tail rotor case. It makes for a much nicer tail appearance. Be aware that you will have to cut the tail boom to fit this fuselage. So putting an extra Trex 600E tail boom on your order list is recommended. Also, if you use the stock 600mm main blades and stock tail rotor blades. You will have a problem. Because of the shortened tail. The 600 mm main blades will contact the stock tail blades. So you will have to go with shorter main or tail blades. I went shorter tail blades. Over all I'm quite pleased with the kit although there were a few "bugs". By the way the instruction"manual?" is very very skimpy I hope this is of some small help. If you need any other pointers or tips about this one let me know Regards __________________ Here, when wanted There, when needed Everywhere, when looked for

07-04-2012, 10:33 PM	#5 (permalink)
LAMAR COOLEY Registered Users My HF Map location Join Date: Oct 2006	Scale Body kljw Sorry, I did not mention that this fuselage will only accept a belt tail drive system. So you will have to convert to belt drive. Therefor you will also need the main tail drive assembly. Regards __________________ Here, when wanted There, when needed Everywhere, when looked for

07-07-2012, 10:32 PM	#7 (permalink)
Chris Reibert Registered Users Join Date: Mar 2006	RCA's website is www.scaleflying.com If you have any questions give them a shout and Rob can get you squared away with everything you need to get your scale project going __________________ https://m.facebook.com/3dandscalerchelicopters/

07-04-2012, 06:56 AM	#3 (permalink)
kljw Registered Users Thread Starter Join Date: Mar 2008	good point!

07-05-2012, 11:40 AM	#6 (permalink)
kljw Registered Users Thread Starter Join Date: Mar 2008	Lamar many thanks for the info, i will have alook at the web page. i worked out that i would need a belt drive tail, but i am unsure if all the other parts will tranfer across from the 600 Pro EFL i have. need to do some more searching on this. keith

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in