Register Now

F-16 CHIEF · 07-20-2012, 12:42 PM

I installed CPII on a friends Trex 450 FB for him last night. It's got the Align GP780 gyro and AR7010 receiver. Once I was done, I popped a battery in and it immediately began beeping like crazy. It being the receiver. What does it not like? Everything looks okay.

Thoughts?

nightflyr · 07-20-2012, 01:10 PM

Rx to the best of my knowledge do not beep... more likely the ESC through the motor

n6nev · 07-20-2012, 01:50 PM

unplug one device at a time,, worth a try

F-16 CHIEF · 07-20-2012, 09:00 PM

Unplugged the throttle, plugged back in and it's good. Odd, but it's working.

n6nev · 07-21-2012, 09:54 AM

Perhaps the pins were off one , I've done that and more, if it can go wrong, I will do it....................Larry

F-16 CHIEF · 07-22-2012, 08:48 PM

Once I turned the radio on, it was all good. Beeping stopped. Flew it with no issues at all. So, idk, but that ESC doesn't like that???

All I know is it works.

powerstroke01 · 07-22-2012, 11:16 PM

Quote:

Originally Posted by F-16 CHIEF

Once I turned the radio on, it was all good. Beeping stopped. Flew it with no issues at all. So, idk, but that ESC doesn't like that???

All I know is it works.

Wait... You had the radio off? and the heli on?

F-16 CHIEF · 07-23-2012, 01:29 PM

Yeah. Plugged the battery in so I could talk to CPII.

07-20-2012, 12:42 PM	#1 (permalink)
F-16 CHIEF Registered Users Join Date: May 2012	CPII issue with new Trex 450 setup I installed CPII on a friends Trex 450 FB for him last night. It's got the Align GP780 gyro and AR7010 receiver. Once I was done, I popped a battery in and it immediately began beeping like crazy. It being the receiver. What does it not like? Everything looks okay. Thoughts?

07-20-2012, 01:10 PM	#2 (permalink)
nightflyr Registered Users My HF Map location Join Date: Jan 2009 Location: Long Island, NY	Rx to the best of my knowledge do not beep... more likely the ESC through the motor __________________ MSR x1 / mCPX x2 / 450 x4 / Chaos600 test bed / Chaos600 Air-Wolf / American WereWolf 800 / KFrame800/900/1000 / Assorted Fixed Wing JR9303 / JR9503 / Futaba10CHP

07-20-2012, 01:50 PM	#3 (permalink)
n6nev Registered Users Join Date: Jul 2009	unplug one device at a time,, worth a try __________________ "You can always tell a pilot,but not much" Gaui X 5 Phanthom 2

07-21-2012, 09:54 AM	#5 (permalink)
n6nev Registered Users Join Date: Jul 2009	Perhaps the pins were off one , I've done that and more, if it can go wrong, I will do it....................Larry __________________ "You can always tell a pilot,but not much" Gaui X 5 Phanthom 2

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-20-2012, 09:00 PM	#4 (permalink)
F-16 CHIEF Registered Users Thread Starter Join Date: May 2012	Unplugged the throttle, plugged back in and it's good. Odd, but it's working.

07-22-2012, 08:48 PM	#6 (permalink)
F-16 CHIEF Registered Users Thread Starter Join Date: May 2012	Once I turned the radio on, it was all good. Beeping stopped. Flew it with no issues at all. So, idk, but that ESC doesn't like that??? All I know is it works.

07-23-2012, 01:29 PM	#8 (permalink)
F-16 CHIEF Registered Users Thread Starter Join Date: May 2012	Yeah. Plugged the battery in so I could talk to CPII.

Register Now

Log-in