Register Now

PlaneHazza · 06-05-2020, 08:00 AM

Can anyone recommend me an 11T motor pinion that is compatible with the standard legacy 700 112t main gear? If you have a part number it'd be hugely appreciated.

My motor is 530kV so the geared head speed is higher than I need/want, especially coming back to the hobby after a long break. I'd rather drop the speed and gain 30s flight time.

Thanks!

crashcopterman · 06-05-2020, 11:05 PM

https://www.onlyfinehelis.com/Align-...0E_p_3935.html

Or H55G002XX

Steve

leadlag · 06-22-2020, 08:58 AM

Pretty sure the CNC Align main gear is a swap out for the Alees so source a Align Pinion.

PlaneHazza · 06-22-2020, 09:17 AM

Got one one order so hoping it might arrive today, though it's 15:15 here now so not likely.

Atomic Skull · 10-28-2020, 02:08 AM

I found that the pinion would sit too high and I had to add a countersink to the bottom. Depends on the design of the collar / snap ring on the motor though. The stock Aleese pinion already has this countersink. You don't need a drill press for this a hand power drill a 6mm bore countersink and an old 6mm shaft of some sort will do the job. Just drill a hole in a block of wood and tap the pinion in there to hold it in place. the stick the shaft and countersink in there and carefully bore out a countersunk. Make sure it stops a short of the setscrew hole.

06-05-2020, 08:00 AM	#1 (permalink)
PlaneHazza Registered Users Join Date: Jul 2006	11T Pinion Can anyone recommend me an 11T motor pinion that is compatible with the standard legacy 700 112t main gear? If you have a part number it'd be hugely appreciated. My motor is 530kV so the geared head speed is higher than I need/want, especially coming back to the hobby after a long break. I'd rather drop the speed and gain 30s flight time. Thanks! __________________ Harry Thunder Tiger Raptor E720 CGY750 \| Mikado Logo 700 CGY760R \|SAB Kraken 580 CGY760R\| Powered by Futaba 18SZ

06-05-2020, 11:05 PM	#2 (permalink)
crashcopterman Registered Users Join Date: Feb 2012 Location: Grande Prairie, Alberta Canada	https://www.onlyfinehelis.com/Align-...0E_p_3935.html Or H55G002XX Steve __________________ Nano CPX \|\| 130X \|\| 230S II 450 3D converted to 450X \|\| 360CFX \|\| 480 Fusion II 550X \|\| Oxy 5 MEG \|\| ALeeS Rush 700 Evolution \|\| Goblin 770 Sport 'My flight style, determines my crash style"

06-22-2020, 09:17 AM	#4 (permalink)
PlaneHazza Registered Users Thread Starter Join Date: Jul 2006	Got one one order so hoping it might arrive today, though it's 15:15 here now so not likely. __________________ Harry Thunder Tiger Raptor E720 CGY750 \| Mikado Logo 700 CGY760R \|SAB Kraken 580 CGY760R\| Powered by Futaba 18SZ

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-22-2020, 08:58 AM	#3 (permalink)
leadlag Registered Users Join Date: Nov 2009	Pretty sure the CNC Align main gear is a swap out for the Alees so source a Align Pinion.

10-28-2020, 02:08 AM	#5 (permalink)
Atomic Skull Registered Users Join Date: Dec 2011	I found that the pinion would sit too high and I had to add a countersink to the bottom. Depends on the design of the collar / snap ring on the motor though. The stock Aleese pinion already has this countersink. You don't need a drill press for this a hand power drill a 6mm bore countersink and an old 6mm shaft of some sort will do the job. Just drill a hole in a block of wood and tap the pinion in there to hold it in place. the stick the shaft and countersink in there and carefully bore out a countersunk. Make sure it stops a short of the setscrew hole.

Register Now

Log-in