FS Super Clean Upgraded 250 or trade for the 450 Pro Combo Kit

[Shef]

I'm looking to trade my fully upgraded 250 for a New (sealed in box) 450 Pro Super Combo plus AR 7000 Rx.

I am the original owner and this bird has seen very little flight time. I have added lots of goodies (more like EVERY goody) to this helicopter, as you can see. If you want an RC helicopter that is extremely stable yet can move into 3D as well this is the right bird.

This offer is for the Heli and all the components and extras listed below. All that you will need to fly this is a DSM2 Transmitter (eg. Spektrum) and a Charger for the batteries and you are off to the park or field!! I will send the batteries fully charged so all you will need to do is bind it to your transmitter (takes 1 minute) and you’re ready to fly!!!

I invested over $1,200 Invested in this package so this is a great trade if you can find a brand new 450 super combo + AR7100 Rx and want to trade.

This bird has seen very little flight time and I have maintained it extremely well, please feel free to ask any questions if I didn't cover something. I would be happy to send more detailed pics to anyone who asks.

I take a lot of pride in my heli builds and the new owner will greatly appreciate the time I took to create this masterpiece!

If you'd prefer to send me a bid for this, feel free, but please remember what I'm trying to accomplish here. I may be willing to part out certain items if the price is right.

Below is the list of included items:

Installed Items on Helicopter:
Align Case w/ Clear Window
T-Rex 250 Super Combo with Silver Frames
Castle Creations 25A ESC
Scorpion 3600KV motor w/ Venom 16T Pinion
DS410s on Cyclic
GP750 Head Lock Gyro
JR 3500G Tail Servo
Spektrum 6100 Receiver
Western Robotics 5.1v Step Down
Micro Heli Anti-Rotation Bracket
KDE Bottom Bracket
New Style Main Gear
New Style Tail Grips w/ Weights
New Metal Tail Control Arm
Align Metal Main Bearing Blocks
Align Metal Tail Servo Mount
Gaui Bearings on Upper & Lower Mixing Arms
Carbon Fiber Tail Rod
Special Washers (Bling) Installed
Metal Tail Rotor shaft Assembly
Metal Tail Drive Gear Asembly
TrueBlood Dampners
Align 205D CF Main Blades
KBDD Tail Blades 4mm
Yellow Lightening Bolt Canopy
New Tail Hub Installed

Batteries:
3x Outrage 860mah 25C
2x Thunder Power 910mah 16C

Extras:
RCM-BL250 Brushless Motor 3400KV
BL15X 15A ESC
Align DS420 Tail Servo
Metal Main Rotor Grips
Metal Tail Holder set (stock ones)
Aluminum Booms
Main Shafts
Feathering Shaft
Align 205D CF Main Blades Set
Flybar Paddles
Flybars
Washout Control Arms
Main Drive Gears w/ One Way Bearing
Main Drive Gear without Bearing
Metal Tail Rotor shaft Assembly
Landing Skids
Anti Rotation Bracket
Tail Blades 42mm
Tail Blades 37mm
Linkage Rod Set
Linkage Ball Set
Radius Arm
Tail Drive Belt
Tail Rotor Control Arm
Ball Links A-B Set
Rubber Damper Set
Bottom Plate
Landing Skid Nut Set
Canopy Nut Set
Original Plastic Main Bearing Blocks
Original Control Arm Bearings (replaced w/ Gaui bearings)

Bearing Sets:
1x MR74ZZ Set
1x MR52ZZ Set

Tools:
MIP Thorpe 0.9mm Tools
One Way Bearing Removal Tool
Trueblood Swash Level Tool
Main Blades Balance Tool
Align Hex Tools
Align Phillips Screwdriver
Align Tweezer
And many extra screws, links, bearings, etc.

[AviatorsAnonymous]

fyi, you probably want a 6100e for that pro, if that's what it's for 7x00 is overkill

Nice 250, I'm building mine right now, it's cute and looks to be better design and made than the Gaui.

bump for a nice heli

[Shef]

Thanks...yeah, guess a 6200 is more of what I need...don't need the 7th channel but I like the extra protection w/ the remote module.

Not in a rush to do this swap as I got the 250 flying soooooo well. The headspeed w/ the Scorpion 3600 is so great that it's nice and stable even w/ a little wind.

You're going to love your 250. Enjoy the build.

[gravydrive]

Be careful with the 6200, man. That is a not great Rx. Stay with the 7000 if you want the remote!

[Shef]

Thanks Gravy

[rcmarty]

could you elaborate on the 6200 for me ? or are you thinking of the 6100 ?

6200 has a remote antenna where the 6100 doesn't.

just a bit concerned as i have a 6200 in my 450 , i see your point on the 6100 though .

-------

nice machine. any other trades considered ? I have a 500 cf kit with 70 flights. What would you sell for ?

martin

[Shef]

I already have a 500 V-Bar and think it's the best thing since sliced bread. As far as the 6200 goes, just like the extra range, but not a necessity for the 450. I guess I'd sell for the price of a new 450 combo + Rx.

[AviatorsAnonymous]

I built my friend's Pro a few weeks back. The 6100e is going to be the best fit.
I don't see how anyone can be worried about range with these and something as small as a 450. You just aren't going to be able to see the model by the time you get to the limits of the range.

I have 6200s, they are nice in bigger birds, but not necessary on a 450 and will just clutter up the installation - which is already pretty packed.

Hard to believe you are willing to sell your 250 for $500, shoot, I just finished mine and already think it's a great flier. 10x better than the Gaui ever was on it's best day and all I've done is an eyeball setup to get her in the air. When a few more parts show up I'll do a full on setup and I'm sure it'll be even better than it is now.

Bump for a good deal.

[Shef]

Yeah, I'm gonna keep this baby...she's making me hone in my skills quite a bit and much cheaper to mess this puppy up than a bigger bird.

Gonna close this thread now.