Register Now

R.Lim · 06-24-2010, 02:24 AM

Quote:

Originally Posted by msg73

Anyone have an Autorotation hub for the L500/600?

Can you tell me the part #?

msg73 · 06-24-2010, 04:15 AM

Logo 500/600 Autorotation hub: MIK4067

deepak · 06-27-2010, 12:28 AM

Quote:

Originally Posted by msg73

Here's what I need:
Logo 500 .7 mod 153T main gear
14T mod .7 pinion (5mm shaft)
Logo 500 tail drive pulley
Logo 500 autorotation hub

Here's what I have to swap:
Logo 10/400 stretch kit for 550mm blades (boom, belt, control rod) - SOLD
Futaba s9254 servo
3 Hyperion Atlas DS20HMD servos
Good ol cash

Hi
Any one needing mod 7 main gears let me know I got 10 of them
Parts for fly bar version head available to. Original swash plates to.
Let me know if anyone needs something I just might have it
PM if interested.
regards
D

Brubache · 07-05-2010, 12:40 AM

anyone have a 12T maybe 11T pinion? mod 7.

Also thrusted tail ?? TY!

SFACV · 07-09-2010, 04:37 PM

Quote:

Originally Posted by Brubache

anyone have a 12T maybe 11T pinion? mod 7.

Also thrusted tail ?? TY!

I still have some mod 7 stuff lying around. All from my camera bird, now converted to mod 1

1 6mm 15 tooth pinion used,
1 6mm 16 tooth pinion new in package.

Also for anyone interested, I have my old flybared head here for parts. I used it until getting V-Bar last summer. Will sell complete or break down for parts.

Dirtmagnet400 · 07-14-2010, 02:48 PM

Here's what i've got for trade.... or sale i suppose.

Head parts:

I've got a complete L500 flybar head (minus grips and dampers)
3 flybars (not including the one already assembled into the head
New in package ball raced washout
New in package 2 sets of "double ring" links
Some new angled links
New in Package head block
New in Package headblock pins
Helidirect mainshafts (new in package 2pcs)

Tail Parts:
New in package L500 boom
New in package L500 belt
Used L500 boom (nothing wrong with it)
Used L500 tail case (complete - nothing wrong with it)
Helidirect L500 tail shafts (new in package 2pcs)

Also, 16t Mod 0.7 5mm pinion - SOLD

and much more but i can't remember off the top of my head... i will update this post when i have more info.

Will trade for:

L600 parts (Tail and Head)
L500SE Belt
L500SE Boom supports - Not the boom itself though.
Any 600SE tail parts
V-Bar head parts
Lo-Pro skids (white preferably)
...and maybe anything else you have to offer..

Blades345 · 07-26-2010, 07:13 PM

I have a Logo mod 7 main gear if anyone would like to trade for a couple sets of links for the FBL head!

Does anyone out there have a Logo 600 belt they no longer need they want to sell?

Blades345 · 08-05-2010, 01:59 AM

Anyone have any extra canopy grommets?

Dirtmagnet400 · 08-05-2010, 09:46 AM

Quote:

Originally Posted by Blades345

I have a Logo mod 7 main gear if anyone would like to trade for a couple sets of links for the FBL head!

Does anyone out there have a Logo 600 belt they no longer need they want to sell?

Hey Blades, i have a new in package 600 belt that i was going to use, but decided not too. Would you like to swap for something or buy it?

HeathH · 08-30-2010, 05:46 PM

hey guys i am in need of a 25mm counterbearing for a 6mm shaft and a 12 tooth mod 1 pinion for a 6mm shaft. I will pay shipping and the price of the part as if they were new. I also many spare parts for a logo 600 if anyone wants to swap.

flymustangs · 08-30-2010, 08:24 PM

I've got a new counterbearing that I decided not to use. I'm gathering parts to build a second Logo 600 so a trade would work. I'm looking for tail parts and main grips and bearings.

HeathH · 08-30-2010, 10:05 PM

i have a set of main blade grips and tail blade holders. I know i have more I will check in the morning and gather a full list.

Blades345 · 09-01-2010, 10:57 PM

Anyone have a bearing for the Logo 600 tail? The part number is MIK 3069, and Readyheli is out.

jakeg1999 · 09-13-2010, 10:56 PM

Did you get your bearing? I have a large box of bearings I can look through if you still need one....just drop me a pm....

jakeg1999 · 09-13-2010, 10:58 PM

I converted a new 6003d to a 600se, so I have a 3d boom, struts, belt, and servo rod....would be interested in swapping for the like for my SE.....

jakeg1999 · 09-13-2010, 11:00 PM

I also have 2-30mm motor mounts that are new and I probably won' t ever use....

jakeg1999 · 09-14-2010, 08:12 PM

Anybody have an 11T mod 1 they want to trade for a nip 13t, or just an extra one they want to sell???

BennyTRD · 09-16-2010, 10:43 AM

Got some stuff left over from my 500 to 600SE conversion. The grips come with complete bearings that are smooth, and shafts are straight. 2 NIP 86mm spindles, 2 NIP CHP Landing gear braces, CHP horizontal and vertical fins, 500 boom case, 1 used set of 500 landing skids, and 1 NIP. Also not pictured are a couple of spare 500 belts that are in good shape for re-use.

Also I have 2 500 Canomod canopies that I no longer need. The Phantom has only been flown a few times and is in like new condition. The Cadmium was involved in a crash but is still very servicable. I had Canomod put my name on them, but that can easily be covered up by a new sticker or paint.

See anything you need, let me know. Might be interested in 600SE parts in they are in like new condition.

OverTemp · 09-25-2010, 04:09 PM

This is probably non-standard, but I have a while whack of Vibe 50 parts that I'd like to trade for Logo 600 and/or 600SE parts... I have virtually every part for a Vibe. Hell... I even have a complete Vibe 50 airframe to trade for another Logo!

Let me know if you'd like to trade!

Cheers!

brian94066 · 09-28-2010, 03:27 PM

don't know if this is relevant

but i have 4x Thunder Power "G4" 45C 6S 2650 packs ($160 each)

2 are not fully broken in yet (2 cycles each)

and the other 2 have never been flown.

all 4 has deans females soldered on, along with fuzzy white industrial strength velcro.

all 4 are currently in storage mode (3.85V per cell) like when they are brand new.

I would like to trade for 4 Hyperion 45C 6S 3300 ($154 on RH)

i'd prefer them to be in the same condition, under 5 cycles, well taken care of

07-05-2010, 12:40 AM	#24 (permalink)
Brubache Registered Users Join Date: Dec 2009	anyone have a 12T maybe 11T pinion? mod 7. Also thrusted tail ?? TY! __________________ yardbirdhelicopters.com #yardbirdheli

07-14-2010, 02:48 PM	#26 (permalink)
Dirtmagnet400 Registered Users Join Date: Jan 2009	Here's what i've got for trade.... or sale i suppose. Head parts: I've got a complete L500 flybar head (minus grips and dampers) 3 flybars (not including the one already assembled into the head New in package ball raced washout New in package 2 sets of "double ring" links Some new angled links New in Package head block New in Package headblock pins Helidirect mainshafts (new in package 2pcs) Tail Parts: New in package L500 boom New in package L500 belt Used L500 boom (nothing wrong with it) Used L500 tail case (complete - nothing wrong with it) Helidirect L500 tail shafts (new in package 2pcs) Also, 16t Mod 0.7 5mm pinion - SOLD and much more but i can't remember off the top of my head... i will update this post when i have more info. Will trade for: L600 parts (Tail and Head) L500SE Belt L500SE Boom supports - Not the boom itself though. Any 600SE tail parts V-Bar head parts Lo-Pro skids (white preferably) ...and maybe anything else you have to offer.. __________________ Logo 600sx, 8717s, 8900g, VBar, Pyro 700-45, Jive T-Rex 450 SE V2 HS-65 MG's, Quark/9257 T-Rex 450L Dominator - All stock except mini VBar Blade Nano CP-S Last edited by Dirtmagnet400; 07-29-2010 at 10:33 AM..

07-26-2010, 07:13 PM	#27 (permalink)
Blades345 Registered Users Join Date: Feb 2009	I have a Logo mod 7 main gear if anyone would like to trade for a couple sets of links for the FBL head! Does anyone out there have a Logo 600 belt they no longer need they want to sell? __________________ When you don't feel like soaring through the wind with a plane,, BEAT IT INTO SUBMISSION WITH A HELI!!! Oxy 4 stretched on 360mm blades. Torque servos on cyclic, BK on tail. HW ESC, Xnova motor.

08-05-2010, 01:59 AM	#28 (permalink)
Blades345 Registered Users Join Date: Feb 2009	Anyone have any extra canopy grommets? __________________ When you don't feel like soaring through the wind with a plane,, BEAT IT INTO SUBMISSION WITH A HELI!!! Oxy 4 stretched on 360mm blades. Torque servos on cyclic, BK on tail. HW ESC, Xnova motor.

09-01-2010, 10:57 PM	#33 (permalink)
Blades345 Registered Users Join Date: Feb 2009	Anyone have a bearing for the Logo 600 tail? The part number is MIK 3069, and Readyheli is out. __________________ When you don't feel like soaring through the wind with a plane,, BEAT IT INTO SUBMISSION WITH A HELI!!! Oxy 4 stretched on 360mm blades. Torque servos on cyclic, BK on tail. HW ESC, Xnova motor.

06-24-2010, 04:15 AM	#22 (permalink)
msg73 Registered Users Join Date: Aug 2005	Logo 500/600 Autorotation hub: MIK4067

08-30-2010, 05:46 PM	#30 (permalink)
HeathH Registered Users My HF Map location Join Date: May 2006	hey guys i am in need of a 25mm counterbearing for a 6mm shaft and a 12 tooth mod 1 pinion for a 6mm shaft. I will pay shipping and the price of the part as if they were new. I also many spare parts for a logo 600 if anyone wants to swap.

08-30-2010, 08:24 PM	#31 (permalink)
flymustangs Registered Users My HF Map location Join Date: Jun 2007	I've got a new counterbearing that I decided not to use. I'm gathering parts to build a second Logo 600 so a trade would work. I'm looking for tail parts and main grips and bearings.

08-30-2010, 10:05 PM	#32 (permalink)
HeathH Registered Users My HF Map location Join Date: May 2006	i have a set of main blade grips and tail blade holders. I know i have more I will check in the morning and gather a full list.

09-13-2010, 10:56 PM	#34 (permalink)
jakeg1999 Registered Users Join Date: Sep 2006	Did you get your bearing? I have a large box of bearings I can look through if you still need one....just drop me a pm....

09-13-2010, 10:58 PM	#35 (permalink)
jakeg1999 Registered Users Join Date: Sep 2006	I converted a new 6003d to a 600se, so I have a 3d boom, struts, belt, and servo rod....would be interested in swapping for the like for my SE.....

09-13-2010, 11:00 PM	#36 (permalink)
jakeg1999 Registered Users Join Date: Sep 2006	I also have 2-30mm motor mounts that are new and I probably won' t ever use....

09-14-2010, 08:12 PM	#37 (permalink)
jakeg1999 Registered Users Join Date: Sep 2006	Anybody have an 11T mod 1 they want to trade for a nip 13t, or just an extra one they want to sell???

09-16-2010, 10:43 AM	#38 (permalink)
BennyTRD Registered Users My HF Map location Join Date: Jul 2008	Got some stuff left over from my 500 to 600SE conversion. The grips come with complete bearings that are smooth, and shafts are straight. 2 NIP 86mm spindles, 2 NIP CHP Landing gear braces, CHP horizontal and vertical fins, 500 boom case, 1 used set of 500 landing skids, and 1 NIP. Also not pictured are a couple of spare 500 belts that are in good shape for re-use. Also I have 2 500 Canomod canopies that I no longer need. The Phantom has only been flown a few times and is in like new condition. The Cadmium was involved in a crash but is still very servicable. I had Canomod put my name on them, but that can easily be covered up by a new sticker or paint. See anything you need, let me know. Might be interested in 600SE parts in they are in like new condition. Attached Thumbnails __________________

09-25-2010, 04:09 PM	#39 (permalink)
OverTemp Registered Users Join Date: Jan 2007	This is probably non-standard, but I have a while whack of Vibe 50 parts that I'd like to trade for Logo 600 and/or 600SE parts... I have virtually every part for a Vibe. Hell... I even have a complete Vibe 50 airframe to trade for another Logo! Let me know if you'd like to trade! Cheers! __________________ 1 - Diabolo 1 stuffed with, well, see below 2 - Diabolo 2 stuffed with testosterone, jittery sweat, and rippling flanks

09-28-2010, 03:27 PM	#40 (permalink)
brian94066 Registered Users My HF Map location Join Date: Apr 2007	don't know if this is relevant but i have 4x Thunder Power "G4" 45C 6S 2650 packs ($160 each) 2 are not fully broken in yet (2 cycles each) and the other 2 have never been flown. all 4 has deans females soldered on, along with fuzzy white industrial strength velcro. all 4 are currently in storage mode (3.85V per cell) like when they are brand new. I would like to trade for 4 Hyperion 45C 6S 3300 ($154 on RH) i'd prefer them to be in the same condition, under 5 cycles, well taken care of __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in