correct part number for 90 se parts please! - HeliFreak
Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > R/C Helicopter Support > Thunder Tiger 60/70/90


Thunder Tiger 60/70/90 Raptor 60/70/90 Helicopters


Reply
 
LinkBack Thread Tools Display Modes
Old 08-03-2010, 09:33 AM   #1 (permalink)
Registered Users
 

Join Date: Aug 2009
Location: england
Default correct part number for 90 se parts please!

im after the correct servo rod for my rear mounted tail servo on my 90 se! i recently bought a raptor 90 rear servo rod but it is to short? are the se carbon booms longer than standard?
also after the correct number for elevator lever for the se!
supercaptaincrash is offline        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 08-03-2010, 08:30 PM   #2 (permalink)
Registered Users
 
Posts: 11
 
My HF Map location
Join Date: Feb 2010
Location: Pelham, Alabama
Default Part Numbers

Elevator Lever P/N: PV0133
Rear Servo Rod P/N: PV0453

These are Thunder Tiger part numbers out of the Raptor 90 SE manual. I can't speak to the length of the aluminum tail boom versus the carbon tail boom. I have not used the aluminum one.
MKG... is offline        Reply With Quote Quick reply to this message
Old 08-04-2010, 02:32 AM   #3 (permalink)
Registered Users
Thread Starter Thread Starter
 

Join Date: Aug 2009
Location: england
Default

Thanks for the reply mate

Thats the number i used for the rear servo rod! but its short! which is why i need to know if the carbon boom is longer slightly!
supercaptaincrash is offline        Reply With Quote Quick reply to this message
Old 08-22-2010, 07:13 PM   #4 (permalink)
Registered Users
 
Posts: 4,606
 

Join Date: Feb 2007
Location: Houston
Default

quick UK has a CF rod conversion...

do a little searching on their site...you can get just the ends...cut the rod to what you need

http://www.quickuk.eu/cat/thunder_ti...rts.html?nav=5


__________________
X-cell Fury 90: 601/9251, 8231's Cyc; DS650; OS 91MP-6; Jr Vibe 90; OS 91RJX Pipe; Jr 8231 cyclic, 770 3D/G8900, Prfct Reg. CCPM; T-Rex 600 NP: 6965HB, 425MG Throttle GY 520/9254; OS50 Hyper,MP-5, Prfct Reg; 600E Bstx, nue1910
seanh is offline        Reply With Quote Quick reply to this message
Reply




Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Insurance
Please select your insurance company (Optional)
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




Copyright © VerticalScope Inc. All rights reserved.
 

SEO by vBSEO 3.6.1