Fun, Learning, Friendship and Mutual Respect START  HERE

Go Back   HeliFreak > R/C Electronics Support > Eagle Tree Systems

Eagle Tree Systems Onboard data loggers, telemetry, and OSD support

Thread Tools Display Modes
Old 12-03-2011, 09:48 AM   #1
Registered Users
Posts: 961

Join Date: Mar 2010
Location: Little Rock, AR USA
Default New to eagle tree/logging - help

Hey guys, I'm running my first large electric with the hobbywing 120hv scorpion 520LE motor and the vbar gov on 12s.
I'm really interested in logging sone flight data an it seems this is my eat option.
First, I presume I will need the v4 150amp ver. But my biggest question is how exactly are you guys installing(physically) these loggers in line between the packs and the esc.
Am I right in assuming that the esc will now plug into the logger and the battery into the logger?
My HW has that spark arrestor built into it making this a little bit of a puzzle especially to make it clean!!
Any suggestions/pics on how you guys are hooking these up to similar setups!!

Thanks guys!
Team Thunder Tiger, Radix
Spyder Batteries
sjsamuel is offline        Reply With Quote
Old 12-05-2011, 04:42 PM   #2
Registered Users
My HF Map location
Join Date: Feb 2011
Location: USA, Atalanta, GA

I would think you could make a small pigtail with the spark arrestor and plug that into the V4 then your pack into the pigtail.
Align T-REX 450 Sport
(Castle Creations Phoenix 45), (Spektrum DX8 AR8000 TM1000), (Revolectrix Co-Pilot II Lite)
Contributor, Team LavaQuad
halcyon32 is offline        Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Copyright © 2004-2016 by, LLC except where otherwise indicated. The logo is a trademark of, LLC.