cb100 w2801pro rudder problem - HeliFreak
Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > R/C Helicopter Support > Walkera Helicopters > CB100


CB100 Walkera CB100 Helicopter Support


Reply
 
LinkBack Thread Tools Display Modes
Old 01-13-2012, 10:30 PM   #1 (permalink)
Registered Users
 

Join Date: Jan 2012
Location: united states,kentucky,maysville
Default cb100 w2801pro rudder problem

I have a cb100 with upgraded ace turbo brushless main and tail rotors. It flies great with my 2402tx but when I bind it with my 2801pro the tail rudder will not keep up and it goes in circles. Tail will move to the right but I get no left movement even with full stick. I have the throttle trim all the way down, the tx set to 2401 mode and all revs set the same as the 2402tx. Anyone have any ideal what is wrong?
baileyhd is offline        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 01-14-2012, 05:28 PM   #2 (permalink)
Registered Users
 
Posts: 1,002
 

Join Date: Nov 2008
Location: Canada
Default

Not quite sure, but have youtried adjusting the pots on the RX?
__________________
Some people have a problem for every solution...
john aeras is offline        Reply With Quote Quick reply to this message
Old 01-14-2012, 10:50 PM   #3 (permalink)
Registered Users
Thread Starter Thread Starter
 

Join Date: Jan 2012
Location: united states,kentucky,maysville
Default

no I have not just assumed since it flew great with the 2603 that the rx was set correctly.
baileyhd is offline        Reply With Quote Quick reply to this message
Old 01-16-2012, 02:28 AM   #4 (permalink)
Registered Users
 
Posts: 1,002
 

Join Date: Nov 2008
Location: Canada
Default

I would try adjusting the gyro pot as it controls the tail, start at the 11:00 o'clock position.
__________________
Some people have a problem for every solution...
john aeras is offline        Reply With Quote Quick reply to this message
Old 01-16-2012, 11:48 AM   #5 (permalink)
Registered Users
 
Posts: 1,351
 

Join Date: Apr 2011
Location: Fullerton, California
Default

Quote:
Originally Posted by baileyhd View Post
I have a cb100 with upgraded ace turbo brushless main and tail rotors. It flies great with my 2402tx but when I bind it with my 2801pro the tail rudder will not keep up and it goes in circles. Tail will move to the right but I get no left movement even with full stick. I have the throttle trim all the way down, the tx set to 2401 mode and all revs set the same as the 2402tx. Anyone have any ideal what is wrong?
When I transitioned to the 2801 pro from the 2603, I had to physically verify that everything was working even though I put the 2801 into 2401 mode. Hold the CB100 in your hand, spool up a bit, and then verify that all the servos and the rudder are responding correctly to the sticks. If anything is responding oppositely, then you can reverse that channel.

Although this advice doesn't seem to strictly address your question, this procedure should be considered step 1.
navigator2011 is offline        Reply With Quote Quick reply to this message
Old 01-17-2012, 09:13 PM   #6 (permalink)
Registered Users
Thread Starter Thread Starter
 

Join Date: Jan 2012
Location: united states,kentucky,maysville
Default

figured it out. the rudder is reversed on the 2402tx but has to be normal for some reason on the 2801pro. thanks for all the help
baileyhd is offline        Reply With Quote Quick reply to this message
Reply




Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Insurance
Please select your insurance company (Optional)
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




Copyright © VerticalScope Inc. All rights reserved.
 

SEO by vBSEO 3.6.1