e325 converted to Flybarless w/Align 3GX - HeliFreak
Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > R/C Helicopter Support > Thunder Tiger Electric Helis


Thunder Tiger Electric Helis Mini Titan E325, Raptor E550 and E620 SE Helicopters


Reply
 
LinkBack Thread Tools Display Modes
Old 05-07-2012, 10:27 PM   #1 (permalink)
Registered Users
 
Posts: 302
 
My HF Map location
Join Date: Jun 2011
Location: Atlanta, GA
Default e325 converted to Flybarless w/Align 3GX

I am in the midst of converting my MT V1 e325 to flybarless and to date have installed the Thunder Tiger Flybarless conversion kit (Head & Grips) and acquired a NIB Align 3GX controller to power it (picking up digital cyclic servos this week). I have plugged in the 3GX and entered DIR mode and setup all connections between the 3GX & Receiver as well as linking it to my PC. Does anyone have proven 3GX settings for the MT e325 that I could use as a baseline to get it in the air? Any cyclic servo recommendations? I was thinking of the AIrtronics 94809 since they have decent speed @ 6v .10/60degree and outstanding torque 39 in-oz. Thanks!
ghenders is offline        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 05-08-2012, 04:46 AM   #2 (permalink)
Registered Users
 
Posts: 1,443
 

Join Date: Oct 2008
Location: Illinois
Default

The 94809's will make for an excellent cyclic servo. I have them on my mini titan. You wont find a better servo in this size in the same price range.
__________________
Trex 250se 3gx
Trex 500 Beastx, Ice 75 9650's & 9257 500mx, Edge main & Kbdd tail blades
Mini Titan e325 Beastx Airtronics 94809 cyclic, 9257 tail, Ice lite 50/scorp 2221-8 Edge mains, Kbdd tail blades
Jr Vibe 50, Beastx, all Futaba servos OS55hz, Hatori sab 50, Radix
Punkin71 is offline        Reply With Quote Quick reply to this message
Old 05-08-2012, 11:38 AM   #3 (permalink)
Registered Users
 
Posts: 302
Thread Starter Thread Starter
 
My HF Map location
Join Date: Jun 2011
Location: Atlanta, GA
Default

Thanks Punkin71! Heliproz has the 94809's for $39.99 which is $10 cheaper then any other price I have seen. I have flown my e325 for a year flybarred and am excited to try out flybarless with the MT since I enjoy the characteristics with my Mcpx. Do the 94809's slip into the stock servo mounts on the MT without any trimming? I had HS-65mg's in there before and had to trim a little to get them to fit. Thanks!
ghenders is offline        Reply With Quote Quick reply to this message
Reply




Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Insurance
Please select your insurance company (Optional)
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




Copyright © Website Acquisitions Inc. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
 

SEO by vBSEO 3.6.1