HK 4025-1100 or HKIII 4025-1100 ? - HeliFreak
Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > R/C Helicopter Support > Mikado Logo Helicopters


Mikado Logo Helicopters Mikado Logo Helicopters Discussion


Reply
 
LinkBack Thread Tools Display Modes
Old 05-27-2012, 10:00 AM   #1 (permalink)
Registered Users
 

Join Date: Jun 2008
Location: Ottawa, Ontario
Default HK 4025-1100 or HKIII 4025-1100 ?

It is time to change motor on my Logo 500 3D. I use Hacker A40 10L at the moment.

The question is to go with HK 4025-1100 or to pick HKIII 4025-1100?

HKIII is heavier, but claims to be more efficient.

My Logo swings 553mm blades, ESC is Jive 100lv. I'd prefer to stay with 5mm shafts, unless there are reasons to go to 6mm. For this matter, having HKIII, I would need to replace shaft to 5mm.

Any advises will be helpful.

Thanks!
Heli_KV is offline        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 05-27-2012, 01:57 PM   #2 (permalink)
Registered Users
 
Posts: 660
 

Join Date: Sep 2010
Location: Ankara, Turkey
Default

There is a thread about Scorpion section that explains differences between HK and HKIII. Maybe it will help your decision.
https://www.helifreak.com/showthread.php?t=402507
If I were you, I would choose HKIII.
__________________
LOGO 600 SX [ Pyro 700-52M | Scorp. Commander V 130A OPTO | VBar Neo | BLS255HV & BLS256HV ]
LOGO 600 SX
[ HKII-4225-500KV | Scorp. Commander V 130A OPTO | VBar Neo | BLS255HV & BLS256HV ]

bavci_0655 is offline        Reply With Quote Quick reply to this message
Old 05-27-2012, 02:53 PM   #3 (permalink)
Registered Users
Thread Starter Thread Starter
 

Join Date: Jun 2008
Location: Ottawa, Ontario
Default

Thanks for pointing. Essentially this is what manufacturer says about HKIII. What worries me is that it is a heavier and I saw a number of HKIIIs for sale recently. Taking into account that they are relatively new, than, why they are for sale. It maybe a wrong impression, I got about HKIIIs. I did not hear bad words of them either.

From the other end manufacturer says good things of them, but what's the suitability of partucular motor to partucular heli - that's the question.

Anyway thanks for the tip.
Heli_KV is offline        Reply With Quote Quick reply to this message
Reply




Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Insurance
Please select your insurance company (Optional)
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




Copyright © Website Acquisitions Inc. All rights reserved.
 

SEO by vBSEO 3.6.1