Fun, Learning, Friendship and Mutual Respect START  HERE

Go Back   HeliFreak > R/C Helicopter Support > Other Makes and Models Helicopters > JS TZ-V2 Frenzy

JS TZ-V2 Frenzy JS Models TZ-V2 Frenzy Helicopters Discussion

Thread Tools Display Modes
Old 07-17-2012, 07:17 AM   #1
Registered Users

Join Date: Apr 2011
Location: Australia, Victoria
Question Raptor part versions for TZ V2 50

Hello all HeliFreak-aZoids,

I am trying to source out the correct parts for my TZ V2 50 and am not exactly sure which Raptor50/30 versions I will need to replace the clutch and one way starter bearing. I have been through two TZ starter shafts and clutch/bearings now to try and stop the OWB from slipping on the shaft when starting the motor. Have tried 3 different lube variations also. Firstly with no oil or grease at all, Didn't stop the slipping. Then with grease but to no avail. And finally with just two drops of light oil. Neither of these options seemed to have stopped the starter shaft from slipping at all.

The V2 starter shaft is 8mm so am I correct assuming that if I change the clutch to a Raptor 50 (part #PV0359), then I will also need to change the starter shaft to a Raptor 50 (part #PV0360)? If this is the case do I also need the Raptor 50 clutch bell and pinion or can I keep the JS Model parts which are still in good shape?

Also, can anyone confirm if the Raptor pinion will screw straight into the JS bell? Or are the dimensions and bearing sizes completely different? Really all I want to do is install a starting train that won't slip.

Any clarification from experienced flyers about the minimum parts needed would be great. Many posts online mention replacing the clutch but aren't very specific with which version part (ie: Raptor 50 or Titan X50 bell). Again have assumed that the Raptor 50 V2 is where the compatibility is.

Many thanks


Last edited by eluminous; 07-18-2012 at 07:21 AM.. Reason: Typo's and additional clarification
eluminous is offline        Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Copyright © 2004-2016 by, LLC except where otherwise indicated. The logo is a trademark of, LLC.