Servo Wires & Length - HeliFreak
Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > R/C Electronics Support > Hitec Radios > Hitec Gyro/Servos


Hitec Gyro/Servos Hitec Gyro and Servo Support


Reply
 
LinkBack Thread Tools Display Modes
Old 08-04-2012, 01:20 PM   #1 (permalink)
Registered Users
 

Join Date: Dec 2007
Location: Canada
Default Servo Wires & Length

Guy's. I just wanted to put up some pictures of how to shorten your servo wires for a NICE clean heli look. I've done TONS AND TONS of these. So i thought i would share.

If you wish to have a pair or a few servo wires shortened or anything electronic because you don't wish to do it. PM ME I'll help ya.

When you build a R/C Car or Heli, "usually" the servo wires are way to long. In my case on the Trex 500 they were way to long, from factory they are 13". I took one out and measured for how long I needed it, then took the servo apart and shortened the wire, now its the perfect length and no access wire in the chassis, looking to get chewed up..

Pics.

Side of the T500,


Bottom cover off the Mini Servo




Now it's done.



If you wish to do it your self, one AWESOME TIP, use electrical tape around the TOP part of the servo, so you don't have to rebuild the servo / take it apart OR loose any pins / gears.

__________________
------------------------------------------------------------------------------------
http://www.alignrccdn.com/
Mr.Gobler is offline        Reply With Quote
Sponsored Links
Advertisement
 
Reply




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




Copyright © VerticalScope Inc. All rights reserved.
 

SEO by vBSEO 3.6.1