titan x50 pitch problems - HeliFreak
Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > R/C Helicopter Support > Thunder Tiger 30/50 > Titan X50


Titan X50 Thunder Tiger Titan X50 Helicopters


Reply
 
LinkBack Thread Tools Display Modes
Old 12-18-2012, 03:43 AM   #1 (permalink)
Registered Users
 

Join Date: May 2011
Location: Australia
Default titan x50 pitch problems

hey guys,

got myself a titan x50 and i don't have a lot setting up experience.

i having a bit of trouble getting full and even pitch throw and was wondering if there is a reference point point on the heli i can line up the control arms with at 0 degrees, ive spoken with the experienced guys i fly with but they are unfamiliar with the titans.

thanks for any help, Jas
Helimetal is offline        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 12-20-2012, 07:56 PM   #2 (permalink)
Registered Users
 

Join Date: Aug 2012
Location: Germany
Default

Take the center of the hole. + the few screws, imagine a horizontal line through. If your control arms align with this line, you got the position of 0 deg cp.
I unfortunately cant load an image cause of using a smarth
Phone


Benjamin
almigurt is offline        Reply With Quote Quick reply to this message
Old 12-22-2012, 01:29 AM   #3 (permalink)
Registered Users
 

Join Date: Mar 2012
Location: Lancaster
Default

There is an picture that BobO made up for this. Look through KouDy's build thead, I know it is in there.

Edit: here it is.

https://www.helifreak.com/showpost.p...1&postcount=82

YB
__________________
Titan X50TT, YS56, GY701
Trex 250 pro all stock.
Trex 450DFC 3GX Pro all stock.
DX8

Last edited by YBNORMAL; 12-22-2012 at 01:35 AM.. Reason: found link
YBNORMAL is offline        Reply With Quote Quick reply to this message
Old 12-25-2012, 02:03 AM   #4 (permalink)
Registered Users
 
Posts: 689
 
My HF Map location
Join Date: Jan 2011
Location: central Europe
Default

Yes unfortunately X50 has only few real reference points because they did put servos angled to the leveled position. Using BobO's photo with lines proves to be the best way so far for many people (me including).

Sent from my Transformer Prime TF201 using Tapatalk HD
__________________
shelved : Titan e325 SE flybarred | Titan X50 flybarred torque tube
Futaba 10C in mode 3
KouDy is offline        Reply With Quote Quick reply to this message
Reply




Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Insurance
Please select your insurance company (Optional)
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




Copyright © VerticalScope Inc. All rights reserved.
 

SEO by vBSEO 3.6.1