Register Now

edsel.labao · 11-05-2013, 08:55 PM

I put this together for people that are interested. it was a little rushed as I was getting ready to leave for vacation while I was shooting it

I hope it helps people in their build and convince people who are on the fence to purchase one after watching it go together.

Part 1 Rotorhead assembly
[ame]http://youtu.be/Xxe3kNHF3pM[/ame]

Part 2 Frame assembly
[ame]http://youtu.be/z60zVlZ-Oc4[/ame]

Part 3 Tail Assembly and Final wrap up
[ame]http://youtu.be/YdYPbKbB2jE[/ame]

aclysma · 11-05-2013, 10:35 PM

Nice!

BLADERANGER · 11-06-2013, 10:13 AM

Very good source of reference. Awesome video series

renefigueroa · 11-14-2013, 02:35 PM

awesome

basmo · 11-14-2013, 06:15 PM

Another good build and tip video Edsel! When I built mine, I wish I would have attached the servos first to the bearing blocks as you demonstrated as an option - would have been easier. To take that idea a step farther, I have heard where it may be an advantage to also run some of the wiring, using zip ties, etc.with only one side attached, then attach the other frame side. Could even attach the ESC and motor wires, receiver connections, before placing the other frame side (by connecting the mounts to one side). Not sure what your opinion is of this method?
Thanks again...

edsel.labao · 11-14-2013, 10:06 PM

Quote:

Originally Posted by basmo

Another good build and tip video Edsel! When I built mine, I wish I would have attached the servos first to the bearing blocks as you demonstrated as an option - would have been easier. To take that idea a step farther, I have heard where it may be an advantage to also run some of the wiring, using zip ties, etc.with only one side attached, then attach the other frame side. Could even attach the ESC and motor wires, receiver connections, before placing the other frame side (by connecting the mounts to one side). Not sure what your opinion is of this method?
Thanks again...

That will definitely work. I did not want to deviate too much from the manual as some people might get lost.

The 700x is a pretty easy heli to wire up IMHO. Lots of zip tie holes.

aclysma · 11-15-2013, 12:00 AM

Yeah, the fact that there's so many possible orderings to assemble it is just indicative that it's easy to work on.

marioa111 · 11-18-2013, 06:42 PM

Very nice Videos. the build is simple. Cant wait to build another

renefigueroa · 01-21-2014, 08:40 PM

+1 awesome

dremf · 02-14-2015, 09:49 AM

can anyone tell me where to buy the BLH5775, BLH5776 and BLH5777. The Heli has been discontinued by Blade/Horizon. Cool piece to own and a very cool option

crashcopterman · 02-14-2015, 03:55 PM

They were never produced, you'll have to retrofit from another brand if you want a tri-blade head.

11-05-2013, 08:55 PM	#1 (permalink)
edsel.labao Registered Users Join Date: Jan 2010	Blade 700X Build video series I put this together for people that are interested. it was a little rushed as I was getting ready to leave for vacation while I was shooting it I hope it helps people in their build and convince people who are on the fence to purchase one after watching it go together. Part 1 Rotorhead assembly [ame]http://youtu.be/Xxe3kNHF3pM[/ame] Part 2 Frame assembly [ame]http://youtu.be/z60zVlZ-Oc4[/ame] Part 3 Tail Assembly and Final wrap up [ame]http://youtu.be/YdYPbKbB2jE[/ame] __________________ Team Horizon Hobby My RC facebook and Youtube Page (please subscribe to get latest news and video): http://www.youtube.com/zoomtt http://www.facebook.com/zoomtt

11-05-2013, 10:35 PM	#2 (permalink)
aclysma Registered Users Join Date: Jan 2012	Nice! __________________

11-06-2013, 10:13 AM	#3 (permalink)
BLADERANGER Registered Users Join Date: Oct 2013	Very good source of reference. Awesome video series __________________

11-14-2013, 06:15 PM	#5 (permalink)
basmo Registered Users Join Date: Jan 2011	Another good build and tip video Edsel! When I built mine, I wish I would have attached the servos first to the bearing blocks as you demonstrated as an option - would have been easier. To take that idea a step farther, I have heard where it may be an advantage to also run some of the wiring, using zip ties, etc.with only one side attached, then attach the other frame side. Could even attach the ESC and motor wires, receiver connections, before placing the other frame side (by connecting the mounts to one side). Not sure what your opinion is of this method? Thanks again... __________________ Trex 700e dfc, ar7200bx, cc120hv JR Vibe 50 Nitros TT Raptor V2 (50 Nitro) w/MD-500 Body Myriad of Blade helis - Fusion 270/360/480

11-15-2013, 12:00 AM	#7 (permalink)
aclysma Registered Users Join Date: Jan 2012	Yeah, the fact that there's so many possible orderings to assemble it is just indicative that it's easy to work on. __________________

11-14-2013, 02:35 PM	#4 (permalink)
renefigueroa Registered Users Join Date: May 2012	awesome

11-18-2013, 06:42 PM	#8 (permalink)
marioa111 Registered Users Join Date: Feb 2010	Very nice Videos. the build is simple. Cant wait to build another __________________ Team ALIGN USA/ENTERPRISE HOBBY Team SPEKTRUM

01-21-2014, 08:40 PM	#9 (permalink)
renefigueroa Registered Users Join Date: May 2012	+1 awesome

02-14-2015, 09:49 AM	#10 (permalink)
dremf Registered Users Join Date: May 2014	need to purchase the 3-blade accessory can anyone tell me where to buy the BLH5775, BLH5776 and BLH5777. The Heli has been discontinued by Blade/Horizon. Cool piece to own and a very cool option

02-14-2015, 03:55 PM	#11 (permalink)
crashcopterman Registered Users Join Date: Feb 2012 Location: Grande Prairie, Alberta Canada	They were never produced, you'll have to retrofit from another brand if you want a tri-blade head. __________________ Nano CPX \|\| 130X \|\| 230S II 450 3D converted to 450X \|\| 360CFX \|\| 480 Fusion II 550X \|\| Oxy 5 MEG \|\| ALeeS Rush 700 Evolution \|\| Goblin 770 Sport 'My flight style, determines my crash style"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in