![]() |
START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
KDS Electronics KDS Electronics Discussion |
![]() |
|
LinkBack | Thread Tools | Display Modes |
![]() |
#1 (permalink) |
Registered Users
Join Date: Jul 2014
|
![]() Check out this thread for some incompatibility issues with KDS servos.
https://www.helifreak.com/showthread.php?t=606245 Be careful what you mix-and-match out there! |
![]() |
![]() ![]() ![]() ![]() |
Sponsored Links | |||
Advertisement |
|
![]() |
#2 (permalink) |
Registered Users
Thread Starter
![]() Join Date: Jul 2014
|
![]() To Summarize:
So from what I read here, if you look up the KDS Servo in it's High School Yearbook, it reads, "Does not play well with others!" To summarize: KDS Servos WORK with the following FBL systems: BeastX Spartan Vortex KDS Ebar Full size Vbar KDS Servos DO NOT work with the following FBL systems: iKon Mini Vbar It would be interesting to find out two different things: 1. What is it about the KDS servos that keep them from being compatible with all FBL systems. 2. What is different in the BeastX, V-Bar, and Vortex, that they are not affected by the "Peculiar Traits" of the KDS servos. |
![]() |
![]() ![]() ![]() ![]() |
![]() |
#3 (permalink) |
Registered Users
Join Date: Mar 2008
|
![]() They work just fine with ikon I have flown them with ikon. Vbar I have not tested but I would guess possibly need a capacitor plugged into the mini vbar.
Sent from my HTC6525LVW using Tapatalk
__________________
Team Empire Hobby Team HobbyWing Gaui X7F, Gaui X7 FZ, Gaui NX7 |
![]() |
![]() ![]() ![]() ![]() |
![]() |
#4 (permalink) |
Registered Users
Join Date: Mar 2011
|
![]() Isn't this the same thread as the one below
__________________
BLACKOUT MINI,ZMR 250,TBS Discovery ,Zephyr 2 TARANIS X9D + ,ez-uhf jr mod GauiX5 Gauix3 |
![]() |
![]() ![]() ![]() ![]() |
![]() |
#5 (permalink) |
Registered Users
Join Date: Apr 2012
|
![]() So you specifically flew the KDS N650HV and KDS N630HV servos with an Ikon and they worked fine?
|
![]() |
![]() ![]() ![]() ![]() |
![]() |
#6 (permalink) |
Registered Users
Join Date: Mar 2008
|
![]() Yes but not with spektrum sats sbus rx and full size rx.
Sent from my HTC6525LVW using Tapatalk
__________________
Team Empire Hobby Team HobbyWing Gaui X7F, Gaui X7 FZ, Gaui NX7 |
![]() |
![]() ![]() ![]() ![]() |
![]() |
#7 (permalink) |
Registered Users
Join Date: Apr 2012
|
![]() Interesting, I wonder if the problem is just certain versions of the Ikon/Vbar and these servos. Do you have any suggestions on what these guys could try. I know they have attempted to reach KDS for help but were unable to get a response. It seems in all cases the users had to purchase other brands of servos to resolve the problem.
|
![]() |
![]() ![]() ![]() ![]() |
![]() |
#8 (permalink) |
Registered Users
Join Date: Mar 2008
|
![]() You can run a capacitor on ikon but with the tests I have ran with a sbus rx and full size rx no issues with out the capacitor
Sent from my HTC6525LVW using Tapatalk
__________________
Team Empire Hobby Team HobbyWing Gaui X7F, Gaui X7 FZ, Gaui NX7 |
![]() |
![]() ![]() ![]() ![]() |
![]() |
#9 (permalink) |
Registered Users
Join Date: Sep 2008
|
![]() The KDS servos also work great with the Bavarian demon fbl unite
__________________
Scorpion , Bavarian Demon ,and , TRM team pilot Need help PM me ![]() |
![]() |
![]() ![]() ![]() ![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|