Fun, Learning, Friendship and Mutual Respect START  HERE

Go Back   HeliFreak > Multi Rotor Support > Gimbals

Gimbals Gimbals

LinkBack Thread Tools Display Modes
Old 02-02-2015, 07:14 AM   #1 (permalink)
Registered Users

Join Date: Feb 2015
Default CS-1 Ultralight 99g gimbal for action cams like mobius

Let me introduce you my new designed gimbal for small action cameras , e.g for mobius.
The main goals during the design of the brand new CS-1 were to create a gimbal that is lighter than any existing one to extend flight time, yet remains rigid and retains the flexibility of mounting options as well as the compatibility with the most popular multicopter brands (and gimbal controllers) and a variety of cameras, too. In order to achieve these targets, unique, ultra-light frame, mini gimbal controller and special 18 g micro motors have been built and tested in various different setups.

details of devlopment and Sources:

The gimbal has been designed for Mobius cameras but any similar size action cams can be mounted on it, such as Innovv, Topcam or the 808 keychain camera
upside motion:
CS-1 Mobius gimbal upside down operation (1 min 58 sec)

test with a gopro:
CS-1 mobius 95g light gimbal & GOPRO! (1 min 0 sec)

in flight frame and motors:
CS-1 Mobius & Topcam Gimbal test (4 min 56 sec)

Mobius CS-1 gimbal test jello micro gimbal motor (4 min 34 sec)

ultralight, RTF weighs only 98-100g based on wiring and controoler type(without camera)
-can be used up side down operations (180 degree mounting)
-strong CNC aluminum frame
-adjustable frame arms
-adjustable mounting plate with variable sensor mounting platforms
-RC pitch (camera tilt) and roll control
-BGC 3.5 mini alexmos controller (with 2.4b7 Fimrware)
-simple setup using SimpleBGC GUI software
-pre-calibrated plug&play configuration for different camera setups (e.g mobius with or without mounting bracket, lens normal A or B wide)
-multi compatibility for mounting your own mini or normal size (50x50mm) gimbal controllers
Frame spec: 43g
Size: 75X75X85 mm
Weight: 95g (including all electronics, excluding camera)
Ground clearance with mounting screw : 85mm
Ground clearance without using mounting screw (with mobius stock mounting bracket): 80mm
Motor spec GBM-1806:
Poles: 12N14P
KV(RPM/V): 80
Resistance: 18omh
Weight: 18g
Wire: 0.17mm
Bottom holes center to center: 12mm and 16mm
Top holes center to center: 9mm
Mounting screw size: M2
Controller spec:
8-bit version of the SimpleBGC gimbal controller
- 2-axis BGC V3.5
- Built-in sensor and USB port
- DVR8313 motor driver
- 2.5-A peak or 1.75-A rms output current per channel
- Driving current: 1.75A max
- power connector: balance plug (for direct connect of 3s lipo battery)

Coptercentre UK is offline        Reply With Quote Quick reply to this message
Sponsored Links

Quick Reply

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.
Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.


Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Copyright © Website Acquisitions Inc. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.

SEO by vBSEO 3.6.1