KDS N630HV and N650HV problem.

[BrainDrain_dx]

***Edit*** - I am dumb, I have a full size vbar, need to test a mini

[Dave H.]

I did a short test with some borrowed MKS servos and the problem went away. I'll do a longer test when my own set arrives.

[Dave H.]

Everything thing is working great with the MKS servos. With the KDS servos, any one servo could shut down the system. (Without the rotor head even being installed - so essentially no load.) With the MKS servos it flies great!

[BorgeBorge]

Had d the EXACT same problem with these servos and a mini vbar. Added first one, then two capacitors, but still the same.

Changed to an iKon, and problem is gone.

[PeteStewardson]

I'm having the same issue with the N320S servos in the Chase 360 combo. Pitch pumping causes a power issue causing low voltage and reboots which also show as errors in the logs.

[joag]

I know this is quite an old post, I am not an sponsored pilot and I don't fly so well like them either but I can tell you the ikon does work with KDS servos, see my Trex600N with KDS 630HV cyclic and 650HV on the tail with the ikon FBL system:

Trex 600N (10 min 16 sec)

BTW my ikon got damaged due to excesive nitro I used contact cleaner and compressed air but coudn't safe it.

Right now the heli is flying with the same set of servos but using a mini vbar, everything has happened without me trying to get around this thread's issue it just happens me having both FBL systems and the KDS sets of servos.

I'll post a video soon with the mini vbar flying and I'll add the to the thread so people see I don't have the issues described here.

Hope this help.