![]() |
START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
KDS Electronics KDS Electronics Discussion |
![]() |
|
LinkBack | Thread Tools | Display Modes |
![]() |
#1 (permalink) |
Registered Users
Join Date: Apr 2015
|
![]() What is better option?
Use a Castle Bec Pro or a Pulse 2S Battery? HV Servos |
![]() |
![]() ![]() ![]() ![]() |
Sponsored Links | |||
Advertisement |
|
![]() |
#2 (permalink) |
Registered Users
Join Date: Dec 2014
|
![]() On which heli?
The BEC Pro shouldn't be used on 12S as it may not supply enough current. If you have HV servos, the 2S LiPo will be sufficient for any heli 550 class and above.
__________________
KDS Chase 360 // Agile 5.5 // Agile 7.2 SAB Goblin 380 // 630 |
![]() |
![]() ![]() ![]() ![]() |
![]() |
#3 (permalink) |
Registered Users
Thread Starter
![]() Join Date: Apr 2015
|
![]() Is a kds 5.5
Castle edge 120hv Servos 680 and 690 hv from the 7.2 |
![]() |
![]() ![]() ![]() ![]() |
![]() |
#4 (permalink) |
Registered Users
Join Date: Oct 2010
|
![]() With a 5.5 at 6S - edge 120, I used a Herc Super Bec - I'm still running spectrum and I also used a receiver instead of satellites. However, a 2s Lipo might help with balance because my 5.5 is a touch tail heavy.
|
![]() |
![]() ![]() ![]() ![]() |
![]() |
#5 (permalink) |
Registered Users
Thread Starter
![]() Join Date: Apr 2015
|
![]() Thanks for the reply!
|
![]() |
![]() ![]() ![]() ![]() |
![]() |
#6 (permalink) |
Registered Users
Join Date: Jul 2012
|
![]() If you go with the bec you won't have to worry about charging the rx lipo since you'll be flying off your flight pack. Just wire the CCPro as noted in the instructions to the 1st 6s pack that way you can just hookup the 1st pack to fire up the electronics and not the esc, then hook up the 2nd pack and fly. I already had rx packs that came with the helis, so I haven't converted over.
__________________
~Jim~ Goblin700 Gasser TRM-300, BD Axon, Align700E w/HC3SX, and a Goblin 380 w/BD3SX, using Futaba 14SGH |
![]() |
![]() ![]() ![]() ![]() |
![]() |
#7 (permalink) |
Registered Users
Join Date: Dec 2014
|
![]() If hes running on a 6S setup he'll be connecting it directly to the ESC, so he should have no problems. The issue only comes when wiring up with 12S setups, which i did and had to deal with extra wiring. I use the Hercules Super BEC on my 7.2 directly on 12S, so that i don't have to deal with charging a 2S pack.
__________________
KDS Chase 360 // Agile 5.5 // Agile 7.2 SAB Goblin 380 // 630 |
![]() |
![]() ![]() ![]() ![]() |
![]() |
#8 (permalink) | |
Registered Users
Join Date: Jul 2012
|
![]() Quote:
__________________
~Jim~ Goblin700 Gasser TRM-300, BD Axon, Align700E w/HC3SX, and a Goblin 380 w/BD3SX, using Futaba 14SGH |
|
![]() |
![]() ![]() ![]() ![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|