![]() |
START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
Titan X50 Thunder Tiger Titan X50 Helicopters |
![]() |
|
LinkBack | Thread Tools | Display Modes |
![]() |
#1 (permalink) |
Registered Users
Join Date: Oct 2008
|
![]() Good news for me is I got my YS 60sr cooking again, like it's supposed to run. Bad news is I burned out the clutch liner and sprang the clutch when I landed during the second flight. I sent an email request to TT in Taiwan to see if I can source the clutch (I already have a good bell/liner and replacement liner). Dang this heli is fun to fly - hope it doesn't make the shelf too long. I am very impressed at how well the clutch held up.
__________________
= R ![]() |
![]() |
![]() ![]() ![]() ![]() |
Sponsored Links | |||
Advertisement |
|
![]() |
#2 (permalink) |
Registered Users
Join Date: Jun 2009
|
![]() gently bend it back with a set of gas pliers. I,ve done it before
|
![]() |
![]() ![]() ![]() ![]() |
![]() |
#3 (permalink) |
Registered Users
Thread Starter
![]() Join Date: Oct 2008
|
![]() Gas pliers? Do tell...
Edit: Google is our friend! I used a sheet of rubber on the clutch, and squeezed it with Robogrip pliers with gentle pressure. I've installed and test flown it successfully with a fresh liner in the bell. Touch of vibration in the tail, but hoping as the liner breaks in, any high spots which might be causing some vibes will wear down with some spool-ups. Thanks for the suggestion, rcflier1!
__________________
= R ![]() Last edited by Rob43; 05-30-2015 at 01:22 PM.. |
![]() |
![]() ![]() ![]() ![]() |
![]() |
#4 (permalink) |
Registered Users
Join Date: Aug 2013
|
![]() Try Rctaiwan.
The clutches are good I've used 3 in my x50/raptors. About $8 us from memory. |
![]() |
![]() ![]() ![]() ![]() |
![]() |
#5 (permalink) |
Registered Users
Thread Starter
![]() Join Date: Oct 2008
|
![]() Thanks. I am all set. I got one of those too.
Of course, now that TT has officially abandoned the model, not sure where anything else will come from. I don't know if to continue flying it or not.
__________________
= R ![]() |
![]() |
![]() ![]() ![]() ![]() |
![]() |
#6 (permalink) |
Registered Users
Join Date: Aug 2013
|
![]() Still some parts floating around on Fast Lad Performance. Their prices are decent and shipping is super quick (4 days to Australia)
Booms Belts Clutches Main shafts (X50) Tail Shafts/tail parts All the above are available from RC Taiwan. Learn to repair your carbon frames! I did with fantastic results. ![]() |
![]() |
![]() ![]() ![]() ![]() |
![]() |
#7 (permalink) |
Registered Users
Thread Starter
![]() Join Date: Oct 2008
|
![]() I ordered a set of servos from FLP a couple of months ago. Took 4 days to get to USA. Then, held at customs for three weeks. Not again. I am not that attached to the bird. I have others to fly without all the to-do for parts.
__________________
= R ![]() |
![]() |
![]() ![]() ![]() ![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|