Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > Multi Rotor Support > Invertix 400 Multirotor Support


Invertix 400 Multirotor Support Invertix 400 Multirotor Support


Reply
 
LinkBack Thread Tools Display Modes
Old 03-24-2015, 09:58 PM   #1 (permalink)
Registered Users
 
Posts: 8,151
 

Join Date: Jun 2009
Location: Edmonton, Alberta, Canada
Default 2 nd Invertix 400

I bought a second one. It is used. Now I have two.

I will set it up and go to the field with two. If I crash one I will have the second one ready ? Or I can fly them back to back.
__________________
Diabolo 700 BE, 600, Synergy-696, E5SS, Logo 600, 200, Goblin Raw 700, VCT, VBar, Egodrift, Scorpion, Kontronik, MKS, XPert, KST
Freeskiken is online now        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 03-25-2015, 01:00 AM   #2 (permalink)
Registered Users
 

Join Date: Jan 2015
Default

you really love this birds it would seem have fun.
severus is offline        Reply With Quote Quick reply to this message
Old 05-29-2015, 12:11 AM   #3 (permalink)
Registered Users
 
Posts: 8,151
Thread Starter Thread Starter
 

Join Date: Jun 2009
Location: Edmonton, Alberta, Canada
Default

Well I finally started building my second Invertix 400. The used kit I bought was not very good. The guy ground the frames to remove the landing gear one of the arms was bent.

So I dismantled it completely and replaced the frame with a brand new carbon frame, sanded the edges and put it together. I finished installing the motors, ESCs, power distribution board, BEC, nano wii board and connected the wires so far.

These kits are really nice to assemble, plug and play
__________________
Diabolo 700 BE, 600, Synergy-696, E5SS, Logo 600, 200, Goblin Raw 700, VCT, VBar, Egodrift, Scorpion, Kontronik, MKS, XPert, KST
Freeskiken is online now        Reply With Quote Quick reply to this message
Old 05-30-2015, 01:36 AM   #4 (permalink)
Registered Users
 
Posts: 8,151
Thread Starter Thread Starter
 

Join Date: Jun 2009
Location: Edmonton, Alberta, Canada
Default

I finished installing the receiver and wiring it tonight. I thought I would try something different for me and install a Spektrum AR8000 receiver and a Satellite and my DX9. I usually use Futaba. So it took me a little while to figure it out but I finally got it. I tested the motor direction. Had to reverse one motor. I installed two red LEDs up front. So now I just have to solder two green lights to my white lights in the back, install the stickers on the canopy and test it....
__________________
Diabolo 700 BE, 600, Synergy-696, E5SS, Logo 600, 200, Goblin Raw 700, VCT, VBar, Egodrift, Scorpion, Kontronik, MKS, XPert, KST

Last edited by Freeskiken; 05-30-2015 at 06:32 PM..
Freeskiken is online now        Reply With Quote Quick reply to this message
Old 05-30-2015, 06:39 PM   #5 (permalink)
Registered Users
 
Posts: 8,151
Thread Starter Thread Starter
 

Join Date: Jun 2009
Location: Edmonton, Alberta, Canada
Default

Well the maiden did not go so well. I finished it and the first battery I got it up and it flew pretty good. Put the second battery in and it flipped on its side and broke all the props ? I couldn't figure it out. Put new props on and the same thing. Went through all the settings and motor directions and they seem good. Put new props on again and tried to lift off ever so gently but it seems to want to flip on its side. It was windy so I put it in the garage and tried to just get it light on the skids but I can't seem to get it to lift off straight. I kept adjusting the trim but it seems to still not want to lift off properly. I tried using a Spectrum AR8000 receiver Satelite and my DX9. It is a full receiver model. I am going to switch it to a Futaba setup like my other Invertix and see if it solves my issues.
__________________
Diabolo 700 BE, 600, Synergy-696, E5SS, Logo 600, 200, Goblin Raw 700, VCT, VBar, Egodrift, Scorpion, Kontronik, MKS, XPert, KST

Last edited by Freeskiken; 05-30-2015 at 10:05 PM..
Freeskiken is online now        Reply With Quote Quick reply to this message
Old 06-24-2015, 06:50 PM   #6 (permalink)
Registered Users
 
Posts: 391
 

Join Date: Feb 2011
Default

So did you ever figure out what was wrong with the used Invertix kit you bought. I bet the NanoWii board was damaged as well. I hope you did not pay to much for it.
iscripter is offline        Reply With Quote Quick reply to this message
Old 06-24-2015, 10:22 PM   #7 (permalink)
Registered Users
 
Posts: 8,151
Thread Starter Thread Starter
 

Join Date: Jun 2009
Location: Edmonton, Alberta, Canada
Default

I just got it back from Encore RC. Bobby said to send it back to him to look at. It was the Nano Wii board.

I have to test it now but it will be go to go. Yes I ended up paying more than a new one. Well it is new now.
__________________
Diabolo 700 BE, 600, Synergy-696, E5SS, Logo 600, 200, Goblin Raw 700, VCT, VBar, Egodrift, Scorpion, Kontronik, MKS, XPert, KST
Freeskiken is online now        Reply With Quote Quick reply to this message
Old 06-25-2015, 03:36 AM   #8 (permalink)
Registered Users
 

Join Date: Nov 2006
Default

Sometimes we have to forget the money side, and balance the pain with more flying fun.
Good news you have it sorted, have fun flying it
Busher is offline        Reply With Quote Quick reply to this message
Old 06-25-2015, 10:56 PM   #9 (permalink)
Registered Users
 
Posts: 8,151
Thread Starter Thread Starter
 

Join Date: Jun 2009
Location: Edmonton, Alberta, Canada
Default

Flew it tonight and it flies GREAT !!

You are right just had fun didn't think about the money at all. Just forget it and have fun.
__________________
Diabolo 700 BE, 600, Synergy-696, E5SS, Logo 600, 200, Goblin Raw 700, VCT, VBar, Egodrift, Scorpion, Kontronik, MKS, XPert, KST
Freeskiken is online now        Reply With Quote Quick reply to this message
Reply




Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in


Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




Copyright © Website Acquisitions Inc. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.

SEO by vBSEO 3.6.1