Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > Multi Rotor Support > Gimbals


Gimbals Gimbals


Reply
 
LinkBack Thread Tools Display Modes
Old 11-08-2015, 10:44 AM   #1 (permalink)
Registered Users
 
My HF Map location
Join Date: May 2008
Default BMGC 2-axis gimabl

I have a 2-axis gimbal and I use it with my Taranis tx and X8R rx. If I turn the gimbal full up it will jitter at full max and the same thing at full down. I know there is a way to stop the gimbal from doing that I just can't wrap my head around the solution. I only need the gimbal to point straight out frontwards and then down to about a 45 to 60 degree tilt.
WyDiablo is offline        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 11-08-2015, 02:13 PM   #2 (permalink)
Registered Users
Thread Starter Thread Starter
 
My HF Map location
Join Date: May 2008
Default

Sorry guys I got it figured out in the software.
WyDiablo is offline        Reply With Quote Quick reply to this message
Old 11-09-2015, 09:28 PM   #3 (permalink)
Registered User
 

Join Date: Jul 2012
Default

Care to enlighten us as to what you did? I see far too many of these I got it figured out questions. It would help some one else having a problem like you had to have access to what some one else did to resolve the problem.
setishock is offline        Reply With Quote Quick reply to this message
Old 11-10-2015, 09:05 AM   #4 (permalink)
Registered Users
Thread Starter Thread Starter
 
My HF Map location
Join Date: May 2008
Default

After setting up the CORRECT software I connected the gimbal and in the pitch section I went from -90 to 90 degree pitch to -30 to 75 degree pitch and it works great now. The gimbal does not jitter when turned down to 75 degree but it still jitters when I turn it up to 30 degree. No matter what degree I enter in pitch up it will jitter. I did not need much angle up for the camera just a little far when I fly at some speed I can point the camera up some to keep from see the ground at the time. It sure did help when I ran across the correct software. The one that was listed in the cheap instructions was wrong and I never could get it to work correctly.
WyDiablo is offline        Reply With Quote Quick reply to this message
Reply




Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in


Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




Copyright © Website Acquisitions Inc. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.

SEO by vBSEO 3.6.1