Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > R/C Electronics Support > Airtronics Radios


Airtronics Radios Airtronics Radios Support


Reply
 
LinkBack Thread Tools Display Modes
Old 04-18-2016, 04:24 PM   #1 (permalink)
Registered Users
 

Join Date: Nov 2011
Default Need help beast x and RDS 8000

What am I doing wrong. I erased my model by mistake, now it will not let me set pitch on the beast x. Every time I try to set it, it works fine for neg but positive just keeps going up and will not stop at 10 , goes all the wat to + 25 degrees. What am I missing?

Its doing the same thing on both my birds. 450 and 500 Is my TX bad?
mousie is offline        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 04-19-2016, 08:01 AM   #2 (permalink)
Registered Users
Thread Starter Thread Starter
 

Join Date: Nov 2011
Default

Anybody? I'am pulling my hair out. Someone has to no.
mousie is offline        Reply With Quote Quick reply to this message
Old 04-24-2016, 08:26 PM   #3 (permalink)
Registered Users
 

Join Date: Apr 2004
Default

TX is not bad. With a BeastX you will need to use a standard pitch setup, non CCPM and then do the CCPM mixing in the BeastX.

Even though you erased the model from the TX the BeastX setup is still in the BeastX itself. It's now a matter of getting the TX setup to work the BeastX correctly.
TMoore is online now        Reply With Quote Quick reply to this message
Old 04-27-2016, 05:44 PM   #4 (permalink)
Registered Users
Thread Starter Thread Starter
 

Join Date: Nov 2011
Default

How do I change it in my TX?
What menu do I go in? I just looked at my TX and went to etc and scroll down to sw and it is in normal, is that correct or do I need to go to ccp3b?
mousie is offline        Reply With Quote Quick reply to this message
Old 04-29-2016, 09:37 PM   #5 (permalink)
Registered Users
 

Join Date: Apr 2004
Default

Normal is the correct mode for the BeastX.
TMoore is online now        Reply With Quote Quick reply to this message
Old 04-30-2016, 09:08 AM   #6 (permalink)
Registered Users
Thread Starter Thread Starter
 

Join Date: Nov 2011
Default

Ok I will double check it. Thank You
mousie is offline        Reply With Quote Quick reply to this message
Old 05-01-2016, 09:06 AM   #7 (permalink)
Registered Users
Thread Starter Thread Starter
 

Join Date: Nov 2011
Default

Thank you again Terry. Its great people can help you out when needed.
mousie is offline        Reply With Quote Quick reply to this message
Old 11-19-2016, 01:35 PM   #8 (permalink)
Registered Users
 

Join Date: Nov 2015
Default

My thought is to check J-L on micro beast. I just finished setting mine up and kind of went through the same thing.
FYI - on the RDS 8000 - the only thing I changed on the new model was the swash type -- normal -- as you did. No other changes needed.

Micro beast is fun and easy to work with.
Don Batman
don batman is offline        Reply With Quote Quick reply to this message
Reply




Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in


Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




Copyright © Website Acquisitions Inc. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.

SEO by vBSEO 3.6.1