450 v2 3d set up a comments and suggestions all taken in to consideration - HeliFreak
Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > R/C Helicopter Support > 450 Class Electric Helicopters


450 Class Electric Helicopters 450 Class Electric Helicopters manufactured by Align, Tarot, SYMA, Airhog, Chaos, HK and similar.


Reply
 
LinkBack Thread Tools Display Modes
Old 06-16-2008, 08:54 PM   #1 (permalink)
Registered Users
 
Posts: 22
 
My HF Map location
Join Date: Jun 2008
Location: rhode island
Default 450 v2 3d set up a comments and suggestions all taken in to consideration

i had a quick question im flying a trex 450 v2 and starting to set up for 3d stock motor and esc hs65hb servos and algin 500 gryo and hs 85bb tail servo im running tro curve at 100 95 90 95 100 and picth curve 0 25 50 75 100 and blade picth and 9 neg and 10 positive. when in 3d mode its wobbles a bit on the ground when i get it up its steady but when going inverted it just seems a bit hard to control (little to no wind) and it also seems to take just a bit more than half stick to lift off the ground any comments or suggestions would deff be helpfull thanks guys
Attached Thumbnails
Click image for larger version

Name:	SANY0088.jpg
Views:	92
Size:	99.5 KB
ID:	51710   Click image for larger version

Name:	SANY0076.jpg
Views:	69
Size:	13.3 KB
ID:	51711   Click image for larger version

Name:	SANY0071.jpg
Views:	79
Size:	113.7 KB
ID:	51712   Click image for larger version

Name:	SANY0080.jpg
Views:	78
Size:	163.4 KB
ID:	51728  

Last edited by edoyle11; 06-16-2008 at 09:57 PM.. Reason: title change
edoyle11 is offline        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 06-16-2008, 09:59 PM   #2 (permalink)
Registered Users
 
Posts: 22
Thread Starter Thread Starter
 
My HF Map location
Join Date: Jun 2008
Location: rhode island
Default forgot one thing

i forgot to mention im using a dx61 with a spektrum ar6200 reciver
edoyle11 is offline        Reply With Quote Quick reply to this message
Old 06-16-2008, 10:09 PM   #3 (permalink)
Registered Users
 
Posts: 1,623
 
My HF Map location
Join Date: Nov 2007
Location: Washington, Bellevue
Default

What form of wobble, tail, head...?
Beaver Rat is offline        Reply With Quote Quick reply to this message
Old 06-16-2008, 10:11 PM   #4 (permalink)
Registered Users
 
Posts: 22
Thread Starter Thread Starter
 
My HF Map location
Join Date: Jun 2008
Location: rhode island
Default wobble

just a bit of head wobble i replaced my orings but still getting just a bit only while its on the ground
edoyle11 is offline        Reply With Quote Quick reply to this message
Old 06-16-2008, 10:26 PM   #5 (permalink)
Registered Users
 

Join Date: Dec 2007
Location: Wisconsin
Default

What size is the pinion, do you have enough head speed? Seems to be consensus that most but not all fly either a 12t or a 13t with the stock motor
jhat is offline        Reply With Quote Quick reply to this message
Old 06-16-2008, 11:10 PM   #6 (permalink)
Registered Users
 
Posts: 22
Thread Starter Thread Starter
 
My HF Map location
Join Date: Jun 2008
Location: rhode island
Default head speed

13t and yeah i have enough head speed im at 90 percent blades are perfectly balanced and all new shafts ect.. its not mecanical i dont think
edoyle11 is offline        Reply With Quote Quick reply to this message
Reply

Tags
3dflight, 3dmode, trex, trex450, trex4503d




Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Insurance
Please select your insurance company (Optional)
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




Copyright © Website Acquisitions Inc. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
 

SEO by vBSEO 3.6.1