10C question - HeliFreak
Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > R/C Electronics Support > Futaba Radios and Electronics > 2.4G Futaba Radios


2.4G Futaba Radios Futaba 2.4G Radio Help and support forum


Reply
 
LinkBack Thread Tools Display Modes
Old 03-19-2017, 12:05 PM   #1 (permalink)
Registered Users
 
Posts: 475
 

Join Date: Sep 2011
Location: Central, Ohio
Default 10C question

I sent my 10CG to the service center because the cursor knob felt loose and when it goes in up or down position it stays there and won't return to neutral position w/o doing it manually. Therefore it will scroll continuously.

I got a bill stating someone replaced the following items:
ENCODER
12Z MULTI SW KNOB
TG SWITCH MOM LONG
REAR CASE
FCC LABEL

First of all the back case didn't need to be replaced. The tiny bit of damage on the back is barely noticeable and certainly does not affect the operation of the radio. And I didn't ask for repair to the back.

I was willing to overlook that issue because it would've been more trouble than it's worth. However, the cursor is doing the same thing as before I sent the radio to be fixed.

My question is, is the cursor knob suppose to return to the neutral position on its own?
__________________
Hughes 500 Trex 450, Airwolf Trex 550, Longranger Trex 600, MD500 Stretched 600 (under construction) Futaba 10C
Tman49 is offline        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 03-29-2017, 09:45 AM   #2 (permalink)
Registered Users
 
Posts: 475
Thread Starter Thread Starter
 

Join Date: Sep 2011
Location: Central, Ohio
Default

Service center sent a prepaid label for me to send the radio back for repair again. I just got a notice the radio is on the way back to me. I hope they got it right this time.
__________________
Hughes 500 Trex 450, Airwolf Trex 550, Longranger Trex 600, MD500 Stretched 600 (under construction) Futaba 10C
Tman49 is offline        Reply With Quote Quick reply to this message
Old 04-02-2017, 07:20 AM   #3 (permalink)
Registered Users
 
Posts: 475
Thread Starter Thread Starter
 

Join Date: Sep 2011
Location: Central, Ohio
Default

I got my 10C back and it appears everything is working as it should. Turn around time was short, so I the service center for that. Thanks.
__________________
Hughes 500 Trex 450, Airwolf Trex 550, Longranger Trex 600, MD500 Stretched 600 (under construction) Futaba 10C
Tman49 is offline        Reply With Quote Quick reply to this message
Reply




Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




Copyright © Website Acquisitions Inc. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.

SEO by vBSEO 3.6.1