Neo on Goblin Comet with Retract

[spe2dev]

Hi guys i am building a Goblin Comet but cant seem to get retract to work.
does any one on here have the same issue. it work with other retract e.g retract servo, but wont work with the sab . i have email Mikado for help but seem like they on holiday.

[tshelby73]

Originally Posted by spe2dev

Hi guys i am building a Goblin Comet but cant seem to get retract to work.
does any one on here have the same issue. it work with other retract e.g retract servo, but wont work with the sab . i have email Mikado for help but seem like they on holiday.

Vcontrol or other radio.

Think you can assign channels to spare ports in software for other radio.

Vcontrol probably have to use macro cells.


Sent from my iPhone using Tapatalk

[Vinger]

With VBC http://www.vstabi.info/en/node/2173

With standard TX you simply use one of the AUX channels.

[spe2dev]

Neo on vcontrol . All the other option are only for retract servo . But this Sab retract need to stay on until it reach target .

[Vinger]

Any link to the operation of it? Cannot see that it will be different to a servo, don't understand what you mean by stay on until target....

http://m.helidirect.com/item/3438333835
From this link it functions like a normal retract servo, needs a simple switch to operate, so any of the solutions in the already linked videos for a normal retract servo will work.

[spe2dev]

yes that the one . i got it to work but does'nt come all the way out. i will try using a servo tester to see if it actually work, just in case the unit itself are faulty.

[Vinger]

OK let us know. Maybe check the "endpoints" of the macrocell setting for the channel you are using. This is better explained here

Celltype Channel (13 min 44 sec)

http://www.vstabi.info/en/node/2171 Explains it with more examples.

[spe2dev]

thank you.
all this video are showing servo moment . i need something that can turn on a light/fan.
i manage to pull it out and put 7.4v straight in and it take 5-7sec till it reach it target then it turn itself off until it get another signal on/off

Sab comet retract (0 min 20 sec)

[spe2dev]

Thank guys
Got it to work I use servo tester to test full open/close now put it back work

[cudaboy_71]

Looks to me like you're not using a signal wire to control servo position, but instead just +/- and -/+ to control motor direction.

In this case I think you will need a relay that is operated by pwm...something like this maybe?

https://hobbyking.com/en_us/multi-re...___store=en_us