K110 tail repair tips - HeliFreak
Fun, Learning, Friendship and Mutual Respect START  HERE

Go Back   HeliFreak > R/C Helicopter Support > Other Makes and Models Helicopters > V977/K110/K120

LinkBack Thread Tools Display Modes
Old 06-12-2017, 12:20 AM   #1 (permalink)
Registered Users

Join Date: Dec 2016
Location: TX
Default K110 tail repair tips

So I was getting a bit out of control in 3D mode and the tail finally broke on me. (had been running ok with tape for awhile )

I have extra booms, but am not sure what all there is to replacing it. Any soldering involved? I have an iron, but am not very good with it at the moment.

HateTheDrake is offline        Reply With Quote Quick reply to this message
Sponsored Links
Old 06-12-2017, 08:02 PM   #2 (permalink)
Registered Users
Posts: 2,449

Join Date: Mar 2012
Location: Wauwatosa, WI

You only have to solder if you want to pass the wire through the boom. You can wrap the wire around the boom and avoid the soldering. The issue is that if you boom strike your tail with the blades, that you can cut the wire. You can run the wire down the opposite side to the direction of rotation and just glue the wires on.
G570, L550, G500 speed, Oxy 3+, P380, XK K110, Open-TX
JWeber is online now        Reply With Quote Quick reply to this message
Old 06-22-2017, 05:20 AM   #3 (permalink)
Registered Users
Posts: 3,991
My HF Map location
Join Date: Jul 2012
Location: Oslo, Norway

Defo get a solid boom (for V977) and shrinkwrap outside the boom and the wires. You'll never break that boom! (no soldering required)
Micro: B/L Nano, XK K110, HCP100S, 180CFX
Mini: 300X BX, X2 Formula BX, OXY3 BD3SX
Medium: 450X 6S BX, X3 6S iKON, G380 BD3SX
Big: Align 700E. DX8, Phoenix, Lynx Team Pilot
SHYguy is offline        Reply With Quote Quick reply to this message
Old 06-28-2017, 07:09 PM   #4 (permalink)
Registered Users

Join Date: Feb 2017
Location: Claremore, Oklahoma

I made an easy cheater jig for butt soldering wires that lets my soldered joints look the same or better than factory. Just need a couple small alligator clips and a coat hanger. . I used a tool holder for peg-board to make mine, but I've made a few for friends.

Spektrum DX8 - 2 x's V977 Micro CP - Flybarred 450 FrankenHeli - TRex 450 Pro DFC - Blade 500 3D (RIP)
Weekender Extra 300s <--- FUN OVER FRUSTRATION

Last edited by RabbitDFFD; 06-28-2017 at 08:20 PM..
RabbitDFFD is offline        Reply With Quote Quick reply to this message

Quick Reply

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.
Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Please select your insurance company (Optional)
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.


Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.

Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Copyright © VerticalScope Inc. All rights reserved.

SEO by vBSEO 3.6.1