Trex 450 Plus DFC BTF battery velcro - HeliFreak
Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > HF Vendor Support > Align Support


Align Support Align Vendor Customer Support Forum


Reply
 
LinkBack Thread Tools Display Modes
Old 05-25-2017, 01:32 PM   #1 (permalink)
Registered Users
 

Join Date: Dec 2009
Location: London Ontario
Default Trex 450 Plus DFC BTF battery velcro

Good Day

I finally managed to get my 450 Plus DFC BTF out for some backyard hovering and I noticed a random shake would occur, it seemed to come and go with nothing in common, canopy on or off.

For my last 2 batteries I did not have the Velcro holding the battery down tight I left it loose and the random shakes did not occur for the last 2 batteries. Could this have been the cause? or could it be something else?


thanks C
__________________
C

Blade 230S, Nano cpx, nano qx/3dqx/fpv, 200qx MCPX V2, Align Trex 250, 250 DFCplus, Trex 450 plus,Trex 500, JR Forza 450, and more I retired
Cman is online now        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 05-25-2017, 05:30 PM   #2 (permalink)
Registered Users
 

Join Date: Jan 2010
Location: Long Island
Default

I cannot see how the battery strap would be causing anything like that, unless if when it is tight the ESC wires or battery wires are rubbing on something causing a vibration.

I would see how it's all wired and see if that looks like a possibility.
nynextel88 is offline        Reply With Quote Quick reply to this message
Old 07-23-2017, 12:35 PM   #3 (permalink)
Registered Users
Thread Starter Thread Starter
 

Join Date: Dec 2009
Location: London Ontario
Default

That must be the case the

It seems to happen the most with the Pulse batteries it must have something to do with how I have the battery lead routed.

I have not put the thing in idle up mode yet, is there anything I need to do before I activate the switch? when I did this with my 250 I suffered an ESC issue where it just shut down. I will check all settings against the manual. its time to progress beyond upright flying.

Thanks for all the support.
__________________
C

Blade 230S, Nano cpx, nano qx/3dqx/fpv, 200qx MCPX V2, Align Trex 250, 250 DFCplus, Trex 450 plus,Trex 500, JR Forza 450, and more I retired
Cman is online now        Reply With Quote Quick reply to this message
Reply




Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




Copyright © Website Acquisitions Inc. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.

SEO by vBSEO 3.6.1