Register Now

DPW · 07-21-2017, 07:19 PM

Something new from HW?

Platinum 40A V4

Battery Count: 2-6S Lipo, 5.2V-25.2V
Cont./Burst Current: 40A (burst in 10 sec)
BEC Output: Switch Mode BEC,5.2V/6.0V/7.4V Cont.: 7A, Burst: 15A
Weight/Size: 49g / 48mm*30mm*15.5m

Features:

Brand new governor program, easy to operate; and its excellent speed-governing effect can make big rotor blades more stable even under rapid load change.

Independent output port for RPM (that is: motor speed) signals.

Compatible LCD program box (*optional accessory), its simple and visual interface allows users to set/revise all the ESC parameters easily. (For detailed information, please refer to User Manual of LCD Program
.
Upgradeable firmware, you can upgrade the ESC after connected it to a PC via the USB cable on the program box.

The independent port, for connecting the program box and setting parameters, can also be the output port of the running status data of the ESC. When coordinating with the data transmission module, it can make the real-time data monitoring and logging possible.

DarkSyd3D · 07-22-2017, 10:53 AM

This is new yes. I have a prototype but unfortunately haven't had time to change out the esc in my bird that it will fit in. It has virtually the same programming as the rest of the V4 series so it will be familiar to current users. And about the same size footprint as the 50/60

Sent from my iPhone using Tapatalk

mba83 · 07-22-2017, 01:08 PM

Does it weigh much less than the 60a? Why buy it instead of 60a if they are the same size?

DarkSyd3D · 07-22-2017, 02:20 PM

If someone has an unmounted 60 to weigh I can see what the 40 is.

Sent from my iPhone using Tapatalk

flint723 · 07-22-2017, 05:49 PM

Anybody know if this will support amp telemetry (which 60a v4 does not).

tonys-heli · 07-23-2017, 07:19 PM

this would go into my oxy3 perfectly I think.

when is it due out? I cant find any info on it..

Mateyhv · 07-25-2017, 08:20 PM

Somewhat on the short side for an Oxy3.

tonys-heli · 07-25-2017, 08:40 PM

Quote:

Originally Posted by Mateyhv

Somewhat on the short side for an Oxy3.

I don't understand what you mean..

DPW · 07-26-2017, 01:53 AM

If HW can do a low $30
or
Even better a high $20

HW40 will have a substantial 40A market

tonys-heli · 07-26-2017, 05:48 AM

Quote:

Originally Posted by DPW

If HW can do a low $30
or
Even better a high $20

HW40 will have a substantial 40A market

It would be nice if HW40 were small or lighter but to keep down cost and have the same function HW may have to use the same form fit function as their other stuff..

where did you see this advertised?

DPW · 07-26-2017, 12:13 PM

HW40 Platinum v4 was about $32.

flint723 · 08-07-2017, 11:23 AM

I still do not see answer on current sensor....

Sad because an $30 multi rotor fc can include one but HW sub 60a esc can not?

PTFlyer · 08-15-2017, 09:41 PM

It clearly shows, (or not so much) is a V3

Look close in the corner of the label....

but this one looks like a V4
https://www.hoelleinshop.com/All-you...9302&c=62&p=62

but it's only good for 3s-4s, so if you run say an X3 on 6s the 60a V4 is about as small as you can get

07-21-2017, 07:19 PM	#1 (permalink)
DPW Registered Users Join Date: Sep 2011 Location: Dallas	HW40 Platinum v4 Something new from HW? Platinum 40A V4 Battery Count: 2-6S Lipo, 5.2V-25.2V Cont./Burst Current: 40A (burst in 10 sec) BEC Output: Switch Mode BEC,5.2V/6.0V/7.4V Cont.: 7A, Burst: 15A Weight/Size: 49g / 48mm30mm15.5m Features: Brand new governor program, easy to operate; and its excellent speed-governing effect can make big rotor blades more stable even under rapid load change. Independent output port for RPM (that is: motor speed) signals. Compatible LCD program box (optional accessory), its simple and visual interface allows users to set/revise all the ESC parameters easily. (For detailed information, please refer to User Manual of LCD Program . Upgradeable firmware, you can upgrade the ESC after connected it to a PC via the USB cable on the program box. The independent port, for connecting the program box and setting parameters, can also be the output port of the running status data of the ESC. When coordinating with the data transmission module, it can make the real-time data monitoring and logging possible. Attached Thumbnails __________________ Align450L / 470/150 DFC/Blade stuff DJI/AR Drone Last edited by DPW; 07-22-2017 at 01:35 PM..*

07-22-2017, 05:49 PM	#5 (permalink)
flint723 Registered Users Join Date: Nov 2012	Anybody know if this will support amp telemetry (which 60a v4 does not). __________________ Protos Max Leggero 700, Logo 600SE, Blade 230s DX9

07-23-2017, 07:19 PM	#6 (permalink)
tonys-heli Registered Users Join Date: Dec 2014 Location: always windy on the east coast	this would go into my oxy3 perfectly I think. when is it due out? I cant find any info on it.. __________________ a bunch of helis... now all vcontrol and neo..finally :lol Last edited by tonys-heli; 07-23-2017 at 07:29 PM..

07-26-2017, 01:53 AM	#9 (permalink)
DPW Registered Users Thread Starter Join Date: Sep 2011 Location: Dallas	Face It: Today's Sales Is All About Price If HW can do a low $30 or Even better a high $20 HW40 will have a substantial 40A market __________________ Align450L / 470/150 DFC/Blade stuff DJI/AR Drone Last edited by DPW; 08-03-2017 at 08:36 PM..

07-26-2017, 12:13 PM	#11 (permalink)
DPW Registered Users Thread Starter Join Date: Sep 2011 Location: Dallas	Texas holdem HW40 Platinum v4 was about $32. __________________ Align450L / 470/150 DFC/Blade stuff DJI/AR Drone Last edited by DPW; 08-03-2017 at 08:36 PM..

07-22-2017, 10:53 AM	#2 (permalink)
DarkSyd3D Registered Users Join Date: Oct 2013	This is new yes. I have a prototype but unfortunately haven't had time to change out the esc in my bird that it will fit in. It has virtually the same programming as the rest of the V4 series so it will be familiar to current users. And about the same size footprint as the 50/60 Sent from my iPhone using Tapatalk

07-22-2017, 01:08 PM	#3 (permalink)
mba83 Registered Users Join Date: Jul 2013	Does it weigh much less than the 60a? Why buy it instead of 60a if they are the same size?

07-22-2017, 02:20 PM	#4 (permalink)
DarkSyd3D Registered Users Join Date: Oct 2013	If someone has an unmounted 60 to weigh I can see what the 40 is. Sent from my iPhone using Tapatalk

07-25-2017, 08:20 PM	#7 (permalink)
Mateyhv Registered Users Join Date: Mar 2011	Somewhat on the short side for an Oxy3.

08-07-2017, 11:23 AM	#12 (permalink)
flint723 Registered Users Join Date: Nov 2012	I still do not see answer on current sensor.... Sad because an $30 multi rotor fc can include one but HW sub 60a esc can not? __________________ Protos Max Leggero 700, Logo 600SE, Blade 230s DX9

08-15-2017, 09:41 PM	#13 (permalink)
PTFlyer Registered Users Join Date: Aug 2006	It clearly shows, (or not so much) is a V3 Look close in the corner of the label.... but this one looks like a V4 https://www.hoelleinshop.com/All-you...9302&c=62&p=62 but it's only good for 3s-4s, so if you run say an X3 on 6s the 60a V4 is about as small as you can get

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in