4 Blade Trex 450 No lift

[cslater484]

Assholes. You ask questions I have answered, you ignore questions I ask, and you judge me on a 4 min video on one setup, ****OFF.

[Mercuriell]

Originally Posted by cslater484

Assholes. You ask questions I have answered, you ignore questions I ask, and you judge me on a 4 min video on one setup, ****OFF.

Originally Posted by cslater484

Thanks guys I am a genious. I'll post the kiss my ass thread later. Fools

That's enough. You have taken up a lot of people's time trying to help you and this is how you respond

This attitude is not welcome here on HF.

[rdlohr]

Originally Posted by cslater484

Welp you know what they say when you assume. I'm no pro but I'm no noob. This is not my first heli. This is not the first time I have setup a heli from nothing.





If you can't understand what I'm talking about then I don't know how I can be any clearer. Maybe your not familiar with spektrum radios and the settings? Thought I was being very descriptive.
So just answer one question for me.
If I put the 4 blades so one of the blades is directly above the tail boom. Where do I put the pitch gauge.

Its obvious from many of your responses that you are a noob. That's not an insult with this crowd, it's where we all started and these guys were generously trying to help you. I would not even be posting but I feel compelled to chime in with the others in their warnings. You will likely hurt yourself or someone near you if you don't take their advice.

Best of luck and hopefully you'll come back with a little humility since the problems you are facing are quite basic and the answers have all been given to you.

Rick