Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > R/C Helicopter Support > Blade Helicopters (eFlite) > Blade 700X


Blade 700X Blade 700X Helicopters Information and Help


Reply
 
LinkBack Thread Tools Display Modes
Old 10-02-2017, 02:31 PM   #1 (permalink)
Registered Users
 

Join Date: Nov 2015
Default 700X and DX9 setup.

Fainely hawe my 700X redy for MAIDE hower
ar7200bx setup as sudgested.
esc as james setup.
evrything chimed and copter is in balanse.

is there something that i nead to cnow befor i go to test hower?
haw set my radio as for my 360cfx.
think it is a god starting point for 700x to..

any tips / hints is haily acsepted..
Miiku is offline        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 10-02-2017, 08:18 PM   #2 (permalink)
Registered Users
 
Posts: 938
 

Join Date: Feb 2012
Default

1. Check your bevel gear mesh - shim as needed, and make sure your 2nd gear counting from front does not move side to side when you press on it.
2. Verify all controls and gyro corrections twice before flight. Also do a range check it you haven't already.
3. Make sure the main blades are pretty tight so they can't fold during spool up.
4. Give yourself lots of room!
During first flight check for tail hold, if it has a fast wag / chatter during a banked turn (sounds like fit-fit-fit-fit-fit really fast) then move servo ball in one hole and reset tail endpoints in 7200bx. After a couple flights recheck the tail gear mesh and verify no movement in number 2 gear.

Have fun! These fly great!
Jherison is offline        Reply With Quote Quick reply to this message
Old 10-03-2017, 04:13 AM   #3 (permalink)
Registered Users
Thread Starter Thread Starter
 

Join Date: Nov 2015
Default

Haw bean rely careful whit the build.
Haw bean building it for 1 year

all gear mesh is ok. haw chimed all gears sow i think all is ok..

ar7200bx settings haw bean checked 3 ore more times that they are ok.

for the ruder/tail servo arm i use the arm from the kit.

haw been running it with no blaids so i can find problems if there was some.

and everything looks ok..
Miiku is offline        Reply With Quote Quick reply to this message
Old 10-03-2017, 06:55 PM   #4 (permalink)
Registered Users
 
Posts: 938
 

Join Date: Feb 2012
Default

Sounds like you are ready then. If you do get the tail chatter use a standard horn and move it in one hole from the stock measurement. Pretty common on this machine.
Have fun!
Jherison is offline        Reply With Quote Quick reply to this message
Old 10-04-2017, 04:26 AM   #5 (permalink)
Registered Users
Thread Starter Thread Starter
 

Join Date: Nov 2015
Default

Haw read abaut the tail problems..
Blade setup is 700mm mains and 115mm tail Zeal blaids.

Im not (yet ) doing any hard 3D flights so i hope this setup is ok for my.

For mainpower i use 2 x 6s 4500mah 30c turnigy (timer set at 4:30)
For AR7200bx and servos i have 2s 1350 lipo and Optiguard..
Miiku is offline        Reply With Quote Quick reply to this message
Reply




Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in


Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




Copyright © Website Acquisitions Inc. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.

SEO by vBSEO 3.6.1