setting rescue/gyro with futaba t10j - HeliFreak
Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > R/C Electronics Support > Spirit FBL system


Spirit FBL system Spirit FBL System Discussion


Reply
 
LinkBack Thread Tools Display Modes
Old 11-02-2017, 03:42 PM   #1 (permalink)
Registered Users
 

Join Date: Jan 2014
Location: Italy
Default setting rescue/gyro with futaba t10j

Hello everybody,

I am trying to set my new tx ( futaba t10j) with spirit pro.
I am stuck not with the gyro/rescue setting.
What I would like to have is:

1) rescue on the spring? switch
2) be able to change the gyro value when I am using the switch idle up.
that means be able to have differents values each idle up.

what I did so far is that I am able to use the rescue but not to change the sensibility of the gyro for each idle up.
Is there any guide or something who can help me?
thank you so much!!
matty609 is offline        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 11-02-2017, 03:43 PM   #2 (permalink)
Registered Users
Thread Starter Thread Starter
 

Join Date: Jan 2014
Location: Italy
Default


Last edited by matty609; 11-02-2017 at 03:49 PM.. Reason: posted an image
matty609 is offline        Reply With Quote Quick reply to this message
Old 11-02-2017, 05:11 PM   #3 (permalink)
Registered Users
 
Posts: 1,520
 

Join Date: Jan 2010
Location: Czech Republic
Default

Hello,

you can assign F: Stabi function in the General tab/Channels window - for example for Channel 8.
Then you can assign a momentary switch to change the value for channel 8 in your radio.

From this moment rescue mode should work if it is configured in the Stabi/Function to Rescue.

You can set Gyro Gain for each flight mode as you wish in your radio in the GYRO menu. In each flight mode it should be configured to AVCS, not NORM.
__________________
Spirit System - www.spirit-system.com
ZeXx86 is online now        Reply With Quote Quick reply to this message
Old 11-03-2017, 12:51 PM   #4 (permalink)
Registered Users
 

Join Date: Nov 2016
Location: UK
Default

As ZeXx says assign rescue to a channel (8) in the software then in aux channel screen on your Tx assign that channel to your spring loaded switch
To change gyro sensitivity in flight modes assign gyro to Cond switch in the gyro sens menu on the Tx ( you have it on switch H) and make sure to stay in avc in all flight modes or you will put the tail in to rate mode
andy6409 is offline        Reply With Quote Quick reply to this message
Old 11-03-2017, 05:15 PM   #5 (permalink)
Registered Users
Thread Starter Thread Starter
 

Join Date: Jan 2014
Location: Italy
Default

I think I did all right. thank you so much

Last edited by matty609; 11-03-2017 at 05:47 PM.. Reason: fixed
matty609 is offline        Reply With Quote Quick reply to this message
Reply




Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Insurance
Please select your insurance company (Optional)
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




Copyright © VerticalScope Inc. All rights reserved.
 

SEO by vBSEO 3.6.1