START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
AccuRC Flight Sim AccuRC Flight Sim Discussion |
|
LinkBack | Thread Tools | Display Modes |
11-25-2017, 12:24 PM | #1 (permalink) |
Registered Users
Join Date: Jan 2011
|
software dosen't see tx
Hello I have a jeti ds14 connected through usb to computer.
in the software under transmitters I have jeti usb selected, in usb device the only choice was accurc dongle which I am not using, under dongle mode I have tried game control and others but the software dosen't see tx In the channels screen I have a red dot on adapter and transmitter I'm in heli mode in the software. What settings do I have wrong? any one with a jeti I would app some advice as It was my understanding I didn't need the dongle. Thanks |
Sponsored Links | |||
Advertisement |
|
11-25-2017, 12:40 PM | #2 (permalink) |
Registered Users
Join Date: Nov 2012
|
The Jeti should be visible in USB Device.
Is it displayed as a Game Controller in joy.cpl (Windows GC config)?
__________________
Jonas OMPHOBBY M7, M4, M2 EVO & M1 EVO Designing things for Fun-Key RotorTech & OMPHOBBY |
11-25-2017, 12:55 PM | #3 (permalink) |
Registered Users
Thread Starter
Join Date: Jan 2011
|
no it only has the choice of accurc dongle in the usb device box?.I have
tried game controller in the dongle mode, should I leave game controller as my preset. Do I have to enable it somehow |
11-25-2017, 01:20 PM | #4 (permalink) |
Registered Users
Join Date: Nov 2012
|
Are you checking joy.cpl?
The AccuRC Dongle should not show up in joy.cpl to begin with. Also, if the Jeti Tx doesn't show up there, AccuRC will have no chance of detecting it- we can only see controllers that show up in joy.cpl as well, or controllers that are connected to the AccuRC dongle.
__________________
Jonas OMPHOBBY M7, M4, M2 EVO & M1 EVO Designing things for Fun-Key RotorTech & OMPHOBBY |
11-25-2017, 01:26 PM | #5 (permalink) |
Registered Users
Join Date: Nov 2005
|
AccuRC isnt seeing your tx which is why its not selectable in the drop down.
As Jonas said, if you open up "joy.cpl" in windows it will show a dialogue that shows what usb controllers are connected to the PC. things like an xbox controller would show up in there and so should your transmitter. If its not showing there then it suggests theres an issue with the tx config or the cable you are connecting the tx to the pc with. Some of those cables have been known to be "charge only" which means they don't have the connections needed to pass the data to the PC. when you plug the tx into the PC does it make the "you just connected something to usb" noise?
__________________
adrian@accurcsimulator.com Direct Email support@accurcsimulator.com AccuRC Support https://discord.gg/ftCKT8U AccuRC Discord Server |
11-25-2017, 03:17 PM | #6 (permalink) |
Registered Users
Thread Starter
Join Date: Jan 2011
|
ok it can see it now,but know I have throttle hold on activated on the flying
screen but I don't have throttle hold assigned in the function page? I was trying to turn it off and ended up creating like 4 different throttle hold windows all are unassigned but throttle hold is still lit up in the flying page so I can't spool up |
11-25-2017, 04:15 PM | #7 (permalink) | ||
Registered Users
Join Date: Nov 2005
|
If you go to TX settings, functions, do you have a channel assigned to hold?
this video from around 5mins shows how functions work
Ade
__________________
adrian@accurcsimulator.com Direct Email support@accurcsimulator.com AccuRC Support https://discord.gg/ftCKT8U AccuRC Discord Server |
||
11-25-2017, 05:31 PM | #8 (permalink) |
Registered Users
Thread Starter
Join Date: Jan 2011
|
no I don't have a channel assigned to throtle hold
|
11-25-2017, 07:25 PM | #9 (permalink) |
Registered Users
Thread Starter
Join Date: Jan 2011
|
ok got it, I had to assign a channel in order to turn it off,thanks
|
11-26-2017, 05:17 AM | #10 (permalink) |
Registered Users
Join Date: Nov 2005
|
out of interest, for future reference, why wasnt the PC seeing the TX?
__________________
adrian@accurcsimulator.com Direct Email support@accurcsimulator.com AccuRC Support https://discord.gg/ftCKT8U AccuRC Discord Server |
11-26-2017, 12:13 PM | #11 (permalink) |
Registered Users
Thread Starter
Join Date: Jan 2011
|
I'm not sure, I think I was exiting usb mode in the jeti to see the sim display in the jeti therefore I think I was disconnecting from the software.
So I have to leave the Tx in USB mode but can't see display or hear voice outputs when I move switches. I think I would have to get a dongle instead of using usb to see and hear tx . |
Thread Tools | |
Display Modes | |
|
|